Open Access
| Issue |
MATEC Web Conf.
Volume 132, 2017
XIII International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2017)
|
|
|---|---|---|
| Article Number | 03005 | |
| Number of page(s) | 5 | |
| Section | Issues of mechanics of heterogeneous and composite materials | |
| DOI | https://doi.org/10.1051/matecconf/201713203005 | |
| Published online | 31 October 2017 | |
- A.M. Lokoshchenko, Polzuchest‘ i dlitel’naia prochnost‘ metallov (Fizmatlit, Moscow, 2016) [in Russian] [Google Scholar]
- I.A. Volkov, L.A. Igumnov, Yu.G. Korotkih, D.A. Kazakov, A.A. Emel’yanov, I.S. Tarasov, M.A. Guseva, Problemy prochnosti i plastichnosti, 78, No 2, 188–207 (2016) [in Russian] [Google Scholar]
- A.G. Kazancev, Problemy prochnosti, No 5, 25–31 (1985) [in Russian] [Google Scholar]
- Yu. N. Rabotnov, Polzuchest‘ ehlementov konstrukcij, (Nauka, Moscow, 1966) [in Russian] [Google Scholar]
- D.A. Gohfel’d, O.S. Sadakov, Plastichnos‘ i polzuchest‘ ehlementov konstrukcij pri povtornyh nagruzheniyah (Mashinostroenie, Moscow, 1984) [in Russian] [Google Scholar]
- V.P. Degtyarev, Plastichnost‘ i polzuchest‘ mashinostroitel’nyh konstrukcij. (Mashinostroenie, Moscow, Mashinostroenie, 1967) [in Russian] [Google Scholar]
- N.N. Malinin, Prikladnaya teoriya plastichnosti i polzuchesti. (Mashinostroenie, Moscow, 1968) [in Russian] [Google Scholar]
- A.M. Lokoshchenko, Polzuchest‘ i dlitel’naya prochnost‘ metallov (Fizmatlit, Moscow, 2016) [in Russian] [Google Scholar]
- Dzh. Bojl, Dzh. Spens, Analiz napryazhenij pri polzuchesti. (Mir, Moscow, 1986) [in Russian] [Google Scholar]
- Ohasi Ono Kavai, Teoreticheskie osnovy inzhenernyh raschetov, ASME, 104, No 3, 1–8 (1982) [in Russian] [CrossRef] [Google Scholar]
- A. Miller, Teoreticheskie osnovy inzhenernyh raschetov, ASME, No 2, 1–20 (1976) [in Russian] [Google Scholar]
- Yu. N. Shevchenko, R.G. Terekhov, Fizicheskie uravneniya termovyazkoplastichnosti, (Naukova Dumka, Kiev, 1982) [in Russian] [Google Scholar]
- P. Pezhina, Osnovnye voprosy vyazkoplastichnosti, (Mir, Moscow, 1968) [in Russian] [Google Scholar]
- J.L. Chaboche, Inter. J. of Plasticity, 5, No. 3, 247–302 (1989) [in Russian] [Google Scholar]
- N.N. Malinin, G.M. Khadjinsky, Inter. J. of Mechanical Science, 14, 235–246 (1972) [in Russian] [CrossRef] [Google Scholar]
- R.D. Krieg, J.C. Swearengen, R.W. Rohde, A physically-based internal variable model for rate-dependent plasticity. Inelastic behavior of pressure vessel and piping components ASME/CSME, PVP-PB-028, 15–28 (1978) [in Russian] [Google Scholar]
- I.A. Volkov, Yu.G. Korotkikh, Uravneniia sostoianiia viazkouprugoplasticheskikh sred s povrezhdeniiami (Fizmalit, Moscow, 2008) [in Russian] [Google Scholar]
- I.A. Volkov, L.A. Igumnov, Iu.G. Korotkikh, Prikladnaia teoriia viazkoplastichnosti (UNN, Nizhny Novgorod, 2015) [in Russian] [Google Scholar]
- I.A. Volkov, L.A. Igumnov, D.A. Kazakov, D.N. Shishulin, I.V. Smetanin, Problems of strength and plasticity, 78, 436 (2016) [Google Scholar]
- A. Nadai, Plastichnost‘ i razrushenie tverdykh tel (Izd-vo inost. lit., Moscow, 1969) [in Russian] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.