Open Access
Issue |
MATEC Web Conf.
Volume 126, 2017
Annual Session of Scientific Papers IMT ORADEA 2017
|
|
---|---|---|
Article Number | 03004 | |
Number of page(s) | 4 | |
Section | Mechanical Engineering Technology | |
DOI | https://doi.org/10.1051/matecconf/201712603004 | |
Published online | 09 October 2017 |
- A. Dugas, J.-J. Lee, and J.-Y. Hascoët, High Speed Milling, in Integrated Design and Manufacturing in Mechanical Engineering, Dordrecht: Springer Netherlands, 2002 pp. 287–294 [CrossRef] [Google Scholar]
- E. B. Msaddek, Z. Bouaziz, M. Baili, and G. Dessein, Modeling and simulation of high-speed milling centers dynamics, Int. J. Adv. Manuf. Technol., vol. 53, no. 9–12, pp. 877–888 Apr. 2011. [CrossRef] [Google Scholar]
- G. Patrascu and G. Carutasu, Using virtual manufacturing simulation in 3D cutting forces prediction, Ann. ORADEA Univ., vol. 5 pp. 1423–1426, 2007. [Google Scholar]
- K. Jauhari, A. Widodo, and I. Haryanto, Evaluation of Dynamic Behavior a Machine Tool Spindle System through Modal and Unbalance Response Analysis, World Acad. Sci. Eng. Technol. Int. J. Mech. Aerospace, Ind. Mechatron. Manuf. Eng., vol. 9, no. 2, pp. 400–406, 2015. [Google Scholar]
- V. Gagnol, B. C. Bouzgarrou, P. Ray, and C. Barra, Dynamic Analyses and Design Optimization of High-Speed Spindle-Bearing System,” in Advances in Integrated Design and Manufacturing in Mechanical Engineering II, Dordrecht: Springer Netherlands, 2007 pp. 505–518 [Google Scholar]
- Sobriety, “DYNROT User Manual.” 2016. [Google Scholar]
- K. Jauhari, A. Widodo, and I. Haryanto, Identification of a Machine Tool Spindle Critical Frequency through Modal and Imbalance Response Analysis, Am. J. Eng. Appl. Sci., vol. 9, no. 2, pp. 213–221, 2016. [CrossRef] [Google Scholar]
- C. E. H. Ventura and A. Hassui, Evaluation of static cutting forces and tool wear in HSM process applied to pocket milling, Int. J. Adv. Manuf. Technol., vol. 65, no. 9–12, pp. 1681–1689 Apr. 2013. [CrossRef] [Google Scholar]
- H. Cao, T. Holkup, and Y. Altintas, A comparative study on the dynamics of high speed spindles with respect to different preload mechanisms, Int. J. Adv. Manuf. Technol., vol. 57, no. 9–12, pp. 871–883 Dec. 2011. [CrossRef] [Google Scholar]
- N. L. Carutasu, Virtual simulation for static behavior of the main spindle assembly of a horizontal drilling and milling CNC machining with a high-speed cutting, Ann. ORADEA Univ. Fascicle Manag. Technol. Eng., no. 2, pp. 125–128, 2016. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.