Open Access
| Issue |
MATEC Web Conf.
Volume 123, 2017
2017 The 2nd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2017)
|
|
|---|---|---|
| Article Number | 00033 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/matecconf/201712300033 | |
| Published online | 21 September 2017 | |
- H.C. Kim, Y. Choi, B.M. Kim Three-Dimensional Rigid-Plastic Finite Element Analysis of Non-Steady- State Shaped Drawing Process International Journal of Machine Tool and Manufacture 39 1999 1135–1155 [CrossRef] [Google Scholar]
- K. Yoshida, H. Furuya Mandrel Drawing and Plug Drawing of Shape-Memory-Alloy Fine Tubes Used in Catheters and Stents Journal of Materials Processing Technology 153–154 2004 145–150 [CrossRef] [Google Scholar]
- S.H. Lee, S.K. Lee, B.M. Kim Study on The Manufacturing Process of Precision Linear Guide Rail Through Shape Rolling and Shape Drawing Journal of Mechanical Science and Technology 24 2010 1647–1653 [CrossRef] [Google Scholar]
- A. Haddi, A. Imad, G. Vega Analysis of Temperature and Speed Effects on the Drawing Stress for Improving the Wire Drawing Process Materials and Design 32 2011 4310–4315 [Google Scholar]
- J. Zhang, J. Sun, J. Long, S. Tang Computer Simulation on Temperature Rise in Process of Wire Drawing Journal of Shanghai Jiaotong University E-5 2000 242–247 [Google Scholar]
- P. Tiernan, R. Carolan, E. Twohig, S.A.M. Tofail Design and Development of A Novel Load-Control Dieless Rod Drawing System CIRP Journal of Manufacturing Science and Technology 4 2011 110–117 [Google Scholar]
- P. Tiernan, M.T. Hillery Dieless Wire Drawing-An Experimental And Numerical Analysis Journal of Materials Processing Technology 155–156 2004 1178–1183 [Google Scholar]
- Y. Huh, B.K. Ha, J.S. Kim Dieless Drawing Steel Wires Using A Dielectric Heating Method and Modeling the Process Dynamics Journal of Materials Processing Technology 210 2010 1702–1708 [CrossRef] [Google Scholar]
- S. Norasethasopon, H. Yoshida Finite Element Simulation of Inclusion Size Effects on Copper Shape- Wire Drawing Materials Science and Engineering 422 2006 252–258 [CrossRef] [Google Scholar]
- S. Norasethasopon, H. Yoshida Influences of Inclusion Shape and Size in Drawing of Copper Shaped- Wire Journal of Materials Processing Technology 172 2006 400–406 [Google Scholar]
- S. Norasethasopon, K. Yashida Prediction of Chevron Crack Initiation in Inclusion Copper Shaped- Wire Drawing Engineering Failure Analysis 15 2008 378–393 [CrossRef] [EDP Sciences] [Google Scholar]
- P. Tiernan, M.T. Hillery An Analysis of Wire Manufacture Using the Dieless Drawing Method Journal of Manufacturing Processes 10 2008 12–20 [Google Scholar]
- E. Feldera, C. Levraua, M. Mantel, N.G.T. Dinh Identification of the Work of Plastic Deformation and the Friction Shear Stress in Wire Drawing Wear 286–287 2012 27–34 [CrossRef] [Google Scholar]
- D.C. Chen, J.Y. Huang Design of Brass Alloy Drawing Process Using Taguchi Method Materials Science and Engineering 464 2007 135–140 [Google Scholar]
- G.Y. Tzou, D.C. Chen, S.H. Lin Study on Wire Rod Drawing Process using the Rotating Die Key Engineering Materials 76 2016 63–67 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.