Open Access
| Issue |
MATEC Web Conf.
Volume 112, 2017
21st Innovative Manufacturing Engineering & Energy International Conference – IManE&E 2017
|
|
|---|---|---|
| Article Number | 06023 | |
| Number of page(s) | 6 | |
| Section | CAD/CAM/CAE/CAX Technologies, Manufacturing Optimization | |
| DOI | https://doi.org/10.1051/matecconf/201711206023 | |
| Published online | 03 July 2017 | |
- P. M. Cunniff, M. A. Auerbach, 23th Army Science Conference, Orlando, SUA, http://web.mit.edu/course/3/3.91/OldFiles/www/slides/cunniff.pdf (2002) [Google Scholar]
- R. R. Kumar, K. S. Raghuram, Review of Research, 3 (2014) [Google Scholar]
- S. Mohan, S. Velu, Intern. J. of Impact Engineering, 63 (2014) [Google Scholar]
- A. Bhatnagar, Lightweight ballistic composites (CRC Press, New York, 2006) [Google Scholar]
- A. Purushothaman, G. Coimbatore, S. S. Ramkumar, J. of Engineered Fibers and Fabrics, 8 (2013) [Google Scholar]
- C. W. Ong, C. W. Boey, S. R. Hixson, J. O. Sinibaldi, Intern. J. of Impact Engineering, 38 (2011) [Google Scholar]
- M. Grujicic, J. Snipes, S. Ramaswami, V. Avuthu, C.-F. Yen, B. Cheeseman, Intern. J. of Structural Integrity, 7/4 (2016) [Google Scholar]
- R. Barauskas, A. Abraitiene, Composite Structures, 104 (2013) [Google Scholar]
- S. Chocron, I. Benloulo, J. Rodrigez, V. Sanchez-Galvez, J. de Physique, IV, 07 (C3), C3-821-826 (1997) [Google Scholar]
- M. El-Habti, PhD thesis, Queen Mary University of London (2010) [Google Scholar]
- B. A.Gama J. W.GillespieJr., Intern. J. of Impact Engineering, 38 (2011) [Google Scholar]
- P. Soltani, M. Keikhosravy, R. H. Oskouei, C. Soutis, Applied Composite Materials, 18 (2011) [Google Scholar]
- G. Nilakantan, E. D. Wetzel, T. A. Bogetti Jr. J. W. Gillespie, Composite Structures, 95 (2013) [Google Scholar]
- D. Zhu, A. Vaidya, B. Mobasher, S. D. Rajan, Composites, Part B, 56 (2014) [Google Scholar]
- G. M. Zhang, R. C. Batra, J. Zheng, Composites, Part B, 39 (2008) [Google Scholar]
- *** AutoDyne composite modeling (ANSYS Inc., 2012) [Google Scholar]
- T. Delpero, G. Lepoittevin, A. Sanchez, Finite Element Modeling with ANSYS, (Strukturlabor, 2010) [Google Scholar]
- V. Năstăsescu, A. Ştefan, C. Lupoiu, Analiza neliniară prin metoda elementelor finite. Fundamente teoretice şi aplicaţii (Military Technical Academy, Bucharest, 2001) [Google Scholar]
- Y. Duan, M. Keefe, T. A. Bogetti, B. A. Cheeseman, B. Powers, Intern. J. of Impact Engineering, 32 (2006) [Google Scholar]
- *** Ballistics Teijin Aramid, Ballistics material handbook 38-1405/2012 (2012) [Google Scholar]
- M. J. Hinton, A. S. Kaddour, P. D. Soden, Failure Criteria in Fibre Reinforced Polymer Composites: The World-Wide Failure Exercise (Elsevier Ltd., 2004) [Google Scholar]
- D. Kreculj, B. Rašuo, Tehnicki vjesnik, 20, 3 (2013) [Google Scholar]
- C. Pirvu, PhD thesis, “Dunarea de Jos” University (Galati University Press, 2015) [Google Scholar]
- *** Ballistic Resistance of Body Armor, NIJ Standard-0101.06, U.S. Department of Justice Office of Justice Programs National Institute of Justice (2008) [Google Scholar]
- *** Penetration Testing. Procedures and Methodology (EC Council Press, 2011) [Google Scholar]
- I. Safta, PhD thesis, Military Technical Academy, Bucharest (2011) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.