Open Access
Issue |
MATEC Web Conf.
Volume 103, 2017
International Symposium on Civil and Environmental Engineering 2016 (ISCEE 2016)
|
|
---|---|---|
Article Number | 01006 | |
Number of page(s) | 8 | |
Section | Sustainable and Advanced Construction Materials | |
DOI | https://doi.org/10.1051/matecconf/201710301006 | |
Published online | 05 April 2017 |
- D.A. Adesanya and A.A. Raheem, Development of corn cob ash blended cement, Construction and Building Materials, 23(1), 347–352 (2009) [CrossRef] [Google Scholar]
- S.R. Abdullah, W.R. Wan Zainal Abidin and S. Shahidan, Strength of Concrete Containing Rubber Particle as Partial Cement Replacement, MATEC Web Conf., 47, 01009 (2016) [CrossRef] [EDP Sciences] [Google Scholar]
- K. Hung, U.J. Alengaram, M. Zamin and S. Poh, Feasibility study of high volume slag as cement replacement for sustainable structural lightweight oil palm shell concrete, J. of Cleaner Production, 91, 297–304 (2015) [CrossRef] [Google Scholar]
- R. Embong, N. Shafiq, A. Kusbiantoro and M.F. Nuruddin, Effectiveness of low concentration acid and solar drying as pre-treatment features for producing pozzolanic sugarcane bagasse ash, J. of Cleaner Production, 112, 953–962 (2016) [CrossRef] [Google Scholar]
- S. Shahidan, I. Isham and N. Jamaluddin, A Review on waste minimization by adopting in self compacting concrete, MATEC Web Conf., 47, 1–7 (2016) [CrossRef] [EDP Sciences] [Google Scholar]
- A. Pereira, J.L. Akasaki, J.L.P. Melges, M.M. Tashima, L. Soriano, M.V. Borrachero, and J. Payá, Mechanical and durability properties of alkali-activated mortar based on sugarcane bagasse ash and blast furnace slag, Ceramics Int., 41(10), 1–13 (2015) [CrossRef] [Google Scholar]
- K.Y. Foo, A vision on the opportunities, policies and coping strategies for the energy security and green energy development in Malaysia. Renewable and Sustainable Energy Reviews, 51, 1477–1498 (2015) [CrossRef] [Google Scholar]
- M.F. Awalludin, O. Sulaiman, R. Hashim, and W.N.A.W. Nadhari, An overview of the oil palm industry in Malaysia and its waste utilization through thermochemical conversion, specifically via liquefaction. Renewable and Sustainable Energy Reviews, 50, 1469–1484 (2015) [Google Scholar]
- M.E. Rahman, A.L. Boon, A.S. Muntohar, M.N. Hashem Tanim, and V. Pakrashi, Performance of masonry blocks incorporating Palm Oil Fuel Ash. J. of Cleaner Production, 78, 195–201 (2014) [CrossRef] [Google Scholar]
- A. Rerkpiboon, W. Tangchirapat, and C. Jaturapitakkul, Strength, chloride resistance, and expansion of concretes containing ground bagasse ash. Construction and Building Materials, 101, 983–989 (2015) [CrossRef] [Google Scholar]
- K.H. Mo, U. Johnson Alengaram, M.Z. Jumaat, S.P. Yap, and S.C. Lee, Green concrete partially comprised of farming waste residues: A review. J. of Cleaner Production, 117, 122–138 (2016) [CrossRef] [Google Scholar]
- S.E. Aprianti, A Huge Number of Artificial Waste Material can be Supplementary Cementitious Material (SCM) for Concrete Production – A review Part II. J. of Cleaner Production. Elsevier Ltd. 142, 4178–4194 (2016) [Google Scholar]
- K. Kaewmanee, P. Krammart, T. Sumranwanich, P. Choktaweekarn, and S. Tangtermsirikul, Effect of free lime content on properties of cement-fly ash mixtures. Construction and Building Materials, 38, 829–836 (2013) [CrossRef] [Google Scholar]
- M. S. Kirgiz, Advancements in mechanical and physical properties for marble powder–cement composites strengthened by nanostructured graphite particles. Mechanics of Materials, 92, 223–234 (2016) [CrossRef] [Google Scholar]
- A. Bahurudeen, D. Kanraj, V. Gokul Dev and M. Santhanam, Performance evaluation of sugarcane bagasse ash blended cement in concrete. Cement and Concrete Composites, 59, 77–88 (2015) [CrossRef] [Google Scholar]
- P. Lertwattanaruk and A. Suntijitto, Properties of natural fiber cement materials containing coconut coir and oil palm fibers for residential building applications. Construction and Building Materials, 94, 664–669 (2015) [Google Scholar]
- G.A.M. Brasileiro, J.A.R. Vieira, and L.S. Barreto, Use of coir pith particles in composites with Portland cement. J. of Environmental Management, 131, 228–238 (2013) [CrossRef] [Google Scholar]
- K. Zheng, J. Zhou and M. Gbozee, Influences of phosphate tailings on hydration and properties of Portland cement. Construction and Building Materials, 98, 593–601 (2015) [CrossRef] [Google Scholar]
- A. Pop and I. Ardelean, Monitoring the size evolution of capillary pores in cement paste during the early hydration via diffusion in internal gradients. Cement and Concrete Research, 77, 76–81 (2015) [CrossRef] [Google Scholar]
- J. Han, K. Wang, J. Shi, and Y. Wang, Mechanism of triethanolamine on Portland cement hydration process and microstructure characteristics. Construction and Building Materials, 93, 457–462 (2015) [CrossRef] [Google Scholar]
- R.C. Kanning, K.F. Portella, M.O.G.P. Bragança, M.M. Bonato, J.C.M. Dos Santos, Banana leaves ashes as pozzolan for concrete and mortar of Portland cement. Construction and Building Materials, 54, 460–465 (2014) [CrossRef] [Google Scholar]
- J.C.B. Moraes, J.L. Akasaki, J.L.P. Melges, J. Monzó, M.V. Borrachero, L. Soriano, M.M. Tashima, Assessment of sugar cane straw ash (SCSA) as pozzolanic material in blended Portland cement: Microstructural characterization of pastes and mechanical strength of mortars. Construction and Building Materials, 94, 670–677 (2015) [CrossRef] [Google Scholar]
- P. Šiler, P. Bayer, T. Sehnal, I. Kolářová, T. Opravil, and F. Šoukal, Effects of hightemperature fly ash and fluidized bed combustion ash on the hydration of Portland cement. Construction and Building Materials, 78, 181–188 (2015) [CrossRef] [Google Scholar]
- A. Bahurudeen and M. Santhanam, Cement & Concrete Composites Influence of different processing methods on the pozzolanic performance of sugarcane bagasse ash. Cement and Concrete Composites, 56, 32–45 (2015) [CrossRef] [Google Scholar]
- E. Khankhaje, M.W. Hussin, J. Mirza, M. Rafieizonooz, M.R. Salim, H.C. Siong and M.N.M. Warid, On blended cement and geopolymer concretes containing palm oil fuel ash. Materials and Design, 89, 385–398 (2016) [CrossRef] [Google Scholar]
- A.S.M.A. Awal, and I.A. Shehu, Evaluation of heat of hydration of concrete containing high volume palm oil fuel ash. Fuel, 105, 728–731, (2013) [CrossRef] [Google Scholar]
- N. Ranjbar, M. Mehrali, U.J. Alengaram, H.S.C. Metselaar and Jumaat, Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar under elevated temperatures. Construction and Building Materials, 65, 114–121 (2014) [CrossRef] [Google Scholar]
- M. Momeen Ul Islam, K.H. Mo, U.J. Alengaram and M.Z. Jumaat, Mechanical and fresh properties of sustainable oil palm shell lightweight concrete incorporating palm oil fuel ash, J. of Cleaner Production, 115, 307–314 (2015) [Google Scholar]
- K. Ganesan, K. Rajagopal, and K. Thangavel, Evaluation of bagasse ash as supplementary cementitious material, Cement and Concrete Composites, 29(6), 515–524 (2007) [CrossRef] [Google Scholar]
- J.C. Arenas-piedrahita, P. Montes-garcía, J.M. Mendoza-rangel and H.Z.L. Calvo, Mechanical and durability properties of mortars prepared with untreated sugarcane bagasse ash and untreated fly ash, Construction and Building Materials, 105, 69–81, (2016) [CrossRef] [Google Scholar]
- G. Sua-iam and N. Makul, Use of increasing amounts of bagasse ash waste to produce self-compacting concrete by adding limestone powder waste, J. of Cleaner Production, 57, 308–319, (2013) [CrossRef] [Google Scholar]
- D. Verma, P.C. Gope, M.K. Maheshwari and R.K. Sharma, Bagasse fiber composites-A review, J. of Materials and Environmental Science, 3(6), 1079–1092 (2012) [Google Scholar]
- P.C. Aitcin,, Binders for Durable and Sustainable Concrete, Taylor & Francis Group, Abingdon, Oxon, United Kingdom, (2008) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.