Open Access
Issue
MATEC Web Conf.
Volume 89, 2017
Laboratory Methods
Article Number 01011
Number of page(s) 4
DOI https://doi.org/10.1051/matecconf/20178901011
Published online 09 December 2016
  1. S. T. Chang, W. C. Lin, T. M. Huang, M. Y. Hsu, P. H. Huang, Measurement of Radius of Curvature by Coordinate Measurement Machine, Applied Mechanics and Materials, Vols 284-287, pp. 488–492, (2013) [CrossRef] [Google Scholar]
  2. T. Brajlih, et al. Possibilities of Using Three-Dimensional Optical Scanning in Complex Geometrical Inspection. Strojniśki vestnik - Journal of Mechanical Engineering [online]. (2011), roč. 57, č. 11, s. 826–833 [cit. 01/04/2015]. ISSN 00392480. Information on: http://en.svjme.eu/data/upload/2011/11/05_2010_152_Brajlih_05.pdf [Google Scholar]
  3. GOM MBH. ATOS Compact Scan: User manual - Hardware. Braunschweig, Germany, (2012) [Google Scholar]
  4. R. Mendřický, Use of Optical Methods for Dimensional Analysis of Multi-Part Moulds. In. Applied Mechanics and Materials, Vol. 474, Trans Tech Publications, Switzerland, (2014), pp 387–392, ISSN 1660-9336 [CrossRef] [Google Scholar]
  5. S. Zhang, Handbook of 3D Machine Vision: Optical Metrology and Imaging (Series in Optics and Optoelectronics), Publisher: CRC Press, (2013), ISBN: 978-1439872192 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.