Open Access
| Issue |
MATEC Web Conf.
Volume 87, 2017
The 9th International Unimas Stem Engineering Conference (ENCON 2016) “Innovative Solutions for Engineering and Technology Challenges”
|
|
|---|---|---|
| Article Number | 02023 | |
| Number of page(s) | 5 | |
| Section | Mechanical Engineering | |
| DOI | https://doi.org/10.1051/matecconf/20178702023 | |
| Published online | 12 December 2016 | |
- M. Walczak, D. Pieniak, and M. Zwierzchowski, “The tribological characteristics of SiC particle reinforced aluminium composites, “ Arch. Civ. Mech. Eng., vol. 15, no. 1, pp. 116–123, 2014. [CrossRef] [Google Scholar]
- K. R. Padmavathi and R. Ramakrishnan, “Tribological behaviour of Aluminium Hybrid Metal Matrix Composite, “ Procedia Eng., vol. 97, pp. 660–667, 2014. [Google Scholar]
- P. Perez, G. Garces., P. Adeva, Influence of texture on the mechanical properties of commercially pure magnesium prepared by powder metallurgy. Journal Material Science, 2007. 42: p. 39693976. [CrossRef] [Google Scholar]
- Groover M.P (2002). “Fundamental of Modern Manufacturing.” 2nd. ed. John Wiley & Sons, Inc.187. [Google Scholar]
- Oghbaei, M., and O. Mirzaee. “Microwave versus conventional sintering: A revies of fundamentals, advantages and applications. “ Alloys and Compounds, pp 175–189, 2010 [Google Scholar]
- Dinesh Agrawal (The Pennsylvania State University), “Microwave Sintering of Ceramics, Composites and Metallic Materials, and Melting of Glasses, “ Transactions of the Indian Ceramic Society, vol. 65, no. 3. pp. 129–144, 2006. [CrossRef] [Google Scholar]
- S. Leparoux. S. Vaucher, O. Beffort, Assessment of Microwave Heating for Sintering of Al/SiC and for in-situ Synthesis of TiC, Adv. Eng Mater 5, pp 449–453, 2003 [CrossRef] [Google Scholar]
- O. Ertugrul, H.-S. Park, K. Onel, and M. Willert-Porada, “Effect of particle size and heating rate in microwave sintering of 316L stainless steel,” Powder Technol., vol. 253, pp. 703–709, 2014. [CrossRef] [Google Scholar]
- M. V. Krishna and A. M. Xavior, “An Investigation on the Mechanical Properties of Hybrid Metal Matrix Composites,” Procedia Eng., vol. 97, pp. 918–924, 2014. [CrossRef] [Google Scholar]
- Y. Zarina, A.M. Mustafa Al Bakri, H. Kamarudin, I.K. Nizar and R. Rafiza, “ Review on the various ash from palm oil waste as geopolymer material.” Rev. Adv. Mater. Sci., vol. 34. no.1, pp. 37–43, 2013. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.