EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 67 (2016) MATEC Web Conf., 67 (2016) 05017 References
Open Access
Issue
MATEC Web Conf.
Volume 67, 2016
International Symposium on Materials Application and Engineering (SMAE 2016)
Article Number 05017
Number of page(s) 12
Section Chapter 5 Metallurgical Engineering
DOI https://doi.org/10.1051/matecconf/20166705017
Published online 29 July 2016
  1. Li, X.Y. Zeng, X. Chen, Ch. Gao, X.J. Zhang, D.J. Zhou. Development of Aluminum-Steel Cladding Strip with Pre-Cladded Brazing Layer Used in Air Cooling System of Power Plants[J]. Materials for Mechanical Engineering, 2015, 39(10):21–28. [Google Scholar]
  2. L. Li, N. Kotobu, F.X. Yin. Progress in cold roll bonding of metals[J]. Science and Technology of Advanced Materials, 2008, 9(2:):1–11. [Google Scholar]
  3. H.D. Manesh, H.S. Sha. Effective parameters on bonding strength of roll bonded Al/St/Al multilayer strips[J]. Journal of Alloys and Compounds, 2009, 476(1/2): 292–299. [CrossRef] [Google Scholar]
  4. D.L. Chen. The Study on Aluminum-steel Plate-fin Heat Exchanger Brazing Technology[D]. Lanzhou University of Technology, 2014. [Google Scholar]
  5. F.N. Afshar, J.H.W. de Wit, H. Terryn, J.M.C. Mol. The effect of brazing process on microstructure evolution and erosion performance of a modified AA4XXX/AA3XXX brazing sheet[J]. Erosion Science[M], 2012(58):242–250. [Google Scholar]
  6. Okamoto, T. Takemoto, K. Uchikawa, Brazability and Erosion by Molten Filler Alloy of Aluminum Base Plates with Intermetallic Compounds[D]. Osaka University, 1983. [Google Scholar]
  7. D.J. Schmatz. Grain Boundary Penetration During Brazing of Aluminum[J], Welding Journal, 1983, 62(10): 267–271. [Google Scholar]
  8. D.J. Zhou, Zh. Chen, X.J. Zhang, J.G. Tang. Effect of Si Addition on Intermetallic Compound Layer at Aluminum/Steel Interface Bond by Rolling[J]. Heat Treatment of Metals, 2014, 39(1):456–468. [Google Scholar]
  9. A.W. Ralph. Liquid film migration during aluminum brazing[J]. SAE paper 971848, 1997. [Google Scholar]
  10. J.L. Murray, A.J. McAlister. The Al-Si(aluminum-silicon)system[J]. Bulletin of Alloy Phase Diagram, 1984, 5(1):74–84. [CrossRef] [Google Scholar]
  11. J. Vikas, V.C. Srivastava, D. Arpan, R.N. Ghosh. Reactive diffusion in the roll bonded iron-aluminum system[J]. La Metallurgia Italiana, 2006(7/8):55–59. [Google Scholar]
  12. H. Okamoto. Phase Diagrams of Binary Iron Alloys[M]. Materials Park, OH: ASM International, 1993. [Google Scholar]
  13. M. Yousaf, J. Iqbal, M. Ajmal. Variables affecting growth and morphology of the intermetallic layer(Fe2Al5)[J]. Materials Characterization, 2011:517–525. [CrossRef] [Google Scholar]
  14. T. Heumann, M. Dittrichn. Structure charater of the Fe2Al5 intermetallic compound in hot dip aluminizing process[J]. Z Metallk, 1959, 50:617–623 [Google Scholar]
  15. M. Vybornov, P. Rogl, F. Sommer F. On the thermodynamic stability and solution behavior of the phases-Al7.4Fe2Si and τσ Al9Fe2Si2[J]. Journal of Alloys and Compounds, 1997, 247(1/2): 154–157. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.