Open Access
MATEC Web of Conferences
Volume 62, 2016
2016 3rd International Conference on Chemical and Food Engineering
Article Number 05002
Number of page(s) 5
Section Environment & Chemistry
Published online 28 June 2016
  1. Jonathan C. Acomb, Mohamad Anas Nahil, Paul T. Williams, “Thermal processing of plastics from waste electrical and electronic equipment for hydrogen production”, Journal of Analytical and Applied Pyrolysis, 103, 320–327, (2013) [Google Scholar]
  2. G. Martinho, A. Pires, L. Saraiva, R. Ribeiro, “Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling”, Waste Management, 32 (6), 1213, (2012) [CrossRef] [Google Scholar]
  3. United Nations University, “Review of Directive 2002/96 on Waste Electrical and Electronic Equipment (WEEE); final report”, (2008) [Google Scholar]
  4. European Union, “EC, Directive 2002/96/EC Waste Electrical and Electronic Equipment”, L27/34, (2003) [Google Scholar]
  5. Bhaskar T, Matsui T, Kaneko J, Uddin MA, Muto A, Sakata Y Novel calcium based sorbent (Ca–C) for the dehalogenation (Br, Cl) process during halogenated mixed plastic (PP/PE/PS/PVC and HIPS-Br) pyrolysis. Green Chem, 4, 372–375, (2002) [CrossRef] [Google Scholar]
  6. Grause G, Ishibashi J, Kameda T, Bhaskar T, Yoshioka TKinetic studies of the decomposition of flame retardant containing high-impact polystyrene. Polym Degrad Stab, 95, 1129–1137, (2010) [CrossRef] [Google Scholar]
  7. Onwudili JA, Insura N, Williams PTComposition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time. J Anal Appl Pyrolysis, 86, 293–303, (2009) [Google Scholar]
  8. Hall WJ, Williams P T Fast pyrolysis of halogenated plastics recovered from waste computers. Energ Fuel, 20, 1536–1549, (2006) [CrossRef] [Google Scholar]
  9. Bhaskar T, Uddin MA, Murai K, Kaneko J, Hamano K, Kusaba T, Muto A, Sakata Y Comparison of thermal degradation products from real municipal waste plastic and model mixed plastics. J Anal Appl Pyrolysis, 70, 579–587, (2003) [CrossRef] [Google Scholar]
  10. Serrano DP, Aguado J, Escola JM, Garagorri E Performance of a continuous screw kiln reactor for the thermal and catalytic conversion of polyethylene-lubricating oil base mixtures. Appl Catal B, 44, 95–105, (2003) [Google Scholar]
  11. Bhask ar T, Matsui T, Uddin MA, Kaneko J, Muto A, Sakata Y Effect of Sb2O3 in brominated heating impact polystyrene (HIPS-Br) on thermal degradation and debromination by iron oxide carbon composite catalyst (Fe–C). Appl Catal B, 43, 229–241, (2003) [CrossRef] [Google Scholar]
  12. Murata K, Hirano Y, Sakata Y, Uddin M A Basic study on a continuous flow reactor for thermal degradation of polymers. J Anal Appl Pyrolysis, 65, 71–90, (2002) [CrossRef] [Google Scholar]
  13. Blazso´ M, Cze´ge´ny Z, Csoma C Pyrolysis and debromination of flame retarded polymers of electronic scrap studied by analytical pyrolysis. J Anal Appl Pyrolysis, 64, 249–261, (2002) [CrossRef] [Google Scholar]
  14. Bockhorn H, Hornung A, Hornung U, Jakobstro¨er P, Kraus M Dehydrochlorination of plastic mixtures. J Anal Appl Pyrolysis, 49, 97–106, (1999) [CrossRef] [Google Scholar]
  15. Blazso´ M, Jakab E Effect of metals, metal oxides, and carboxylates on the thermal decomposition processes of poly(vinyl chloride). J Anal Appl Pyrolysis, 49, 125–143, (1999) [CrossRef] [Google Scholar]
  16. R. Luijk, H. Haj, and L. Nelissen, “Formation of polybrominated dibenzofurans during extrusion of high-impact polystylene/decabromodiphenyl ether/antimony (III) oxide,” Environ Sci Technol, 26, 2191–2198, (1992) [CrossRef] [Google Scholar]
  17. Uemichi Y, Makino Y, Kanazuka T Degradation of polyethylene to aromatic hydrocarbons over metal-supported activated carbon catalysts. J Anal Appl Pyrolysis, 14, 331–344, (1989) [CrossRef] [Google Scholar]
  18. A. López, I. de Marco, B.M. Caballero, M.F. Laresgoiti, A. Adrados, A. Aranzabal, “Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and Red Mud” Applied Catalysis B: Environmental, 104, 211–219, (2011) [CrossRef] [Google Scholar]
  19. C. Xie, F. Liu, S. Yu, F. Xie, L. Li, S. Zhang, J. Yang, “Study on catalytic pyrolysis of polystyrene over base modified silicon mesoporous molecular sieve “ Catalysis Communications, 9, 1132–1136, (2008) [CrossRef] [Google Scholar]
  20. Bhaskar T. et al., “Effect of polyethylene terephthalate (PET) on the pyrolysis of brominated flame retardant-containing high-impact polystyrene (HIPS-Br),” J Mater Cycles Waste Manage, 12, 332–340, (2010) [CrossRef] [Google Scholar]
  21. S. Peng et al., “Debromination of flame-retarded TV housing plastic waste,”, J Mater Cycles Waste Manage, 12, 103–107, (2010) [CrossRef] [Google Scholar]
  22. P. S. Kulkarni, J. G. Crespo, and C. A. M. Afonso, “Dioxins sources and current remediation technologies-a review,” Environ Int, 34, 139–153, (2008) [CrossRef] [Google Scholar]
  23. C. Vasile, M. A. Brebu, T. Karayildirim, J. Yanik, and H. Darie, “Feedstock recycling from plastic and thermoset fractions of used computers (I): pyrolysis,”, J Mater Cycles Waste Manage, 8, 99–108, (2006) [Google Scholar]
  24. R. Luijk, H. Wever, K. Olie, G. Haj, and J. J. Boon, “The influence of the polymer matrix on the formation of polybrominated dibenzo-p-dioxins (PBDDs) and polybrominated dibenzofurans (PBDFs),” Chemosphere, 23, 1172–1183, (1991) [CrossRef] [Google Scholar]
  25. X. Yang, L. Sun, J. Xiang, S. Hu, S. Su, “Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): A review” Waste Management, 33, 462–473, (2013) [CrossRef] [Google Scholar]
  26. Research Association For Feedstock Recycling of Plastics Japan, Base and Application of Plastic Recycling, CMC BOOKS Japan, 44ff, (2012) [Google Scholar]
  27. T. Kwon, G. A. Tsigdinos, and T. J. Pinnavaia, “Pillaring of layered double hydroxides (LDH’s) by polyoxometalate anions” J. Am. Chem. Soc., 110, 3653–3654, (1988) [CrossRef] [Google Scholar]
  28. N. Morita, T. Wajima, and H. Nakagome, “Reduction in Content of Bromine Compounds in the Product Oil of Pyrolysis Using Synthetic Hydrotalcite,” International Journal of Chemical Engineering and Applications, 6(4), 262–266, (2015) [CrossRef] [Google Scholar]
  29. N. Morita, A. T. Saito, T. Wajima, and H. Nakagome, “Halogen Reduction in Pyrolysis Oil from Bromine-containing Plastics Using Hydrotalcite,” Advances in Environment Research, 87, 54–61, (2015) [Google Scholar]
  30. N. Morita, M. Nakayasu, A. T. Saito, T. Wajima, and H. Nakagome, “Effect of Hydrotalcite on Bromine Content in Oil Produced from the Pyrolysis of Acrylonitrile-Butadiene-Styrene Plastics,” International Journal of Chemical Engineering and Applications, 7(4), 23–27, (2016) [CrossRef] [Google Scholar]
  31. T. Kwon, G. A. Tsigdinos, and T. J. Pinnavaia, “Pillaring of layered double hydroxides (LDH’s) by polyoxometalate anions” J. Am. Chem. Soc., 110, 3653–3654, (1988) [CrossRef] [Google Scholar]
  32. S. Miyata, “The syntheses of hydrotalcite-like compounds and their structures and physico-chemical properties I: The systems Mg2+-Al3+-NO3-, Mg2+-Al3+-Cl-, Mg2+-Al3+-ClO4-, Ni2+-Al3+-Cl- and Zn2+-Al3+-Cl-,” Clays Clay Miner., 23, 369–375, (1975) [Google Scholar]
  33. T. Kameda, M. Nakamura, T. Yoshioka, “Removal of antimonate ions from an aqueous solution by anion exchange with magnesium–aluminum layered double hydroxide and the formation of a brandholzite-like structure.” Journal of Environmental Science and Health, Part A, 47, 1146–1151, (2012) [CrossRef] [Google Scholar]
  34. T. Kameda, K. Hoshi, T. Yoshioka, “Uptake of Sc3+ and La3+ from aqueous solution using ethylenediaminetetraacetate-intercalated CuAl layered double hydroxide reconstructed from CuAl oxide.” Solid State Sciences, 13, 366–371, (2011) [CrossRef] [Google Scholar]
  35. K. Ralla, U. Sohling, K. Suck, F. Sander, C. Kasper, F. Ruf, T. Scheper, “Adsorption and separation of proteins by a synthetic hydrotalcite” Colloids and Surfaces B, Biointerfaces, 87, 217–225, (2011) [CrossRef] [Google Scholar]
  36. K. J. Martin, and T. J. Pinnavaia, “Layered double hydroxides as supported anionic reagents. Halide-ion reactivity in zinc chromium hexahydroxide halide hydrates [Zn2Cr(OH)6X.nH2O] (X = Cl, I),” J. Am. Chem. Soc., 108, 541–542, (1986) [CrossRef] [Google Scholar]
  37. T. Kameda, N. Uchiyama, T. Yoshioka, “Removal of HCl, SO2, and NO by treatment of acid gas with Mg-Al oxide slurry” Chemosphere, 82, 587–591, (2011) [CrossRef] [Google Scholar]
  38. E. Suzuki, M. Okamoto, and Y. Ono, “Catalysis by interlayer anions of a synthetic hydrotalcite-like mineral in a halide exchange between organic halides,” Chem. Lett., 18, 1485–1486, (1989) [CrossRef] [Google Scholar]
  39. Kazuya Morimoto, Sohtaro Anraku, Jun Hoshino, Tetsuro Yoneda, Sato Tsutomu, “Surface complexation reactions of inorganic anions on hydrotalcite-like compounds” Journal of Colloid and Interface Science, 384, 99–104, (2012) [CrossRef] [Google Scholar]
  40. Lin Deng, Zhou Shi, “Synthesis and characterization of a novel Mg-Al hydrotalcite-loaded kaolin clay and its adsorption properties for phosphate in aqueous solution”, Journal of Alloys and Compounds, 637, 188–196, 2015. [CrossRef] [Google Scholar]
  41. Ganapati D. Yadav, Payal A. Chandan, “A green process for glycerol valorization to glycerol carbonate over heterogeneous hydrotalcite catalyst”, Catalysis Today, 237, 47–53, 2014. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.