Open Access
Issue
MATEC Web of Conferences
Volume 46, 2016
2nd International Seminar for Fire Safety of Facades
Article Number 02004
Number of page(s) 12
Section Test and Assessment Methods
DOI https://doi.org/10.1051/matecconf/20164602004
Published online 04 May 2016
  1. “FM Approvals Standard for Cavity Walls and Rainscreens, Class Number 4411”, FM Approvals, Norwood, MA, 2016
  2. “Invention of STYROFOAMTM””. Dow Chemical. Retrieved January 19, 2016
  3. “Caution – Plastics in Construction”, Record, v. 77, p. 6-11, Factory Mutual Insurance Corporation, 1997
  4. IBC 2012, Chapter 26, International Code Council, 2012
  5. NFPA 5000, “Building Construction and Safety Code”, National Fire Protection Association, Quincy, MA. 2015
  6. ASTM D1692, “Standard Method of Test for Flammability of Plastic Sheeting and Cellular Plastics”, American Society for Testing and Materials, West Conshohocken, PA. 1968
  7. ASTM E84, “Standard Test Method for Surface Burning Characteristics of Building Materials”, ASTM International, West Conshohocken, PA
  8. Babrauskas, V., Lucas, D., Eisenberg, D., Singla, V., Dedeo, M., & Blum, A., “Flame Retardants in Building Insulation: A Case for Re-evaluating Building Codes”, Building Research and Information, 40, 738-755, 2012 [CrossRef]
  9. FM Global, “FM Global Data Sheet 1-57: Plastics in Construction”, Norwood, MA, January 2009, Interim Revision July 2015
  10. Choi, K.K. and Taylor, W. “Combustibility of Insulation in Cavity Walls”, National Research Council Canada, Division of Building Research, 1984
  11. NFPA 275, “Standard Method of Fire Tests for the Evaluation of Thermal Barriers”, National Fire Protection Association, Quincy, MA. 2013
  12. NFPA 286, “Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth”, National Fire Protection Association, Quincy, MA. 2015
  13. UL 723, “Standard for Test for Surface Burning Characteristics of Building Materials”, Underwriters Laboratories LLC, Northbrook, IL, 2008
  14. NFPA 101, “Life Safety Code”, National Fire Protection Association, Quincy, MA. 2015
  15. “Fire Research on Cellular Plastics: The Final Report of the Products Research Committee”, National Bureau of Standards, Washington, DC. 1980
  16. NFPA 285, “Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components”, National Fire Protection Association, Quincy, MA. 2012
  17. NFPA 251, “Standard Methods of Tests of Fire Endurance of Building Construction and Materials”, National Fire Protection Association, Quincy, MA. 2006
  18. ASTM E119, “Standard Test Methods for Fire Tests of Building Construction and Materials”, ASTM International, West Conshohocken, PA. 2015
  19. ANSI/UL 263, “Standard for Fire Tests of Building Construction and Materials”, American National Standards Institute/Underwriters Laboratories LLC, 2015
  20. NFPA 268, “Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source”, National Fire Protection Association, Quincy, MA. 2012
  21. NFPA 259, “Standard Test Method for Potential Heat of Building Materials”, National Fire Protection Association, Quincy, MA. 2013
  22. Jamison, K.L.T., Boardman, D.A., and Khan, M.M. “A New Fire Performance Test for Cavity Wall Insulation”, Proceedings of Fire & Materials, San Francisco, CA, February 2015
  23. “Cavity Walls - Design Guide for Taller Cavity Walls”, Masonry Advisory Council, Park Ridge, IL, 2002
  24. ISO 9705:1993, “Fire Tests – Full-scale Room Test for Surface Products”, International Organization for Standardization, Geneva, Switzerland, 1993
  25. “FM Approvals Standard for Cleanroom Materials Flammability Test Protocol, Class Number 4910”, Norwood, MA, June 2009
  26. “FM Approvals Standard for Wafer Carriers for Use in Cleanrooms, Class Number 4911”, Norwood, MA, April 2010
  27. “Victor Torch Handles, Cutting Attachments, and Heating Nozzles Safety and Operating Instructions (Form No. 0056-0138)”, Thermadyne Industries Incorporated, St. Louis, MO, May 14, 2008
  28. “FM Global Property Loss Prevention Data Sheet 1-12, Ceilings and Concealed Spaces”, FM Global, Norwood, MA, May 2008
  29. Heskestad, G., “A Fire Products Collector for Calorimetry into the MW Range”, Technical Report J.I. 0C2E1.RA, Factory Mutual Research Corporation, Norwood, MA, June 1981 (Available upon request)
  30. Khan, M.M., Jamison, K.L.T. and de Ris, J.L., “Upward Fire Growth over Thermally Thin Corrugated Paperboard”, Proceedings of the 10th International Symposium on Fire Safety Science, 2011

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.