Open Access
MATEC Web of Conferences
Volume 33, 2015
ESOMAT 2015 – 10th European Symposium on Martensitic Transformations
Article Number 03016
Number of page(s) 6
Section NiTi-based alloys
Published online 07 December 2015
  1. R.C.T Wu, C.Y. Chung, Differential Scanning Calorimetric (DSC) Analysis Of Rotary Nickel-Titanium (Niti) Endodontic File (RNEF). J Mater Eng Perform, 21, 2012, p. 2515–2518. [CrossRef]
  2. Z. Sanghvi, K. Mistry, Design Features of Rotary Instruments in Endodontics. The Journal of Ahmedabad Dental College and Hospital, 2, 2011, p. 6–11.
  3. W.A. Brantley, T.A. Svec, M. Iijima, J.M. Powers, T.H. Grentzer, Differential Scanning Calorimetric Studies of Nickel Titanium Rotary Endodontic Instruments. J Endodont, 28, 2002, p. 567–572. [CrossRef]
  4. Y. Shen, H.M. Zhou, Z. Wang, L. Campbell, Y.F. Zheng, M. Haapasalo, Phase Transformation Behavior and Mechanical Properties of Thermomechanically Treated K3XF Nickel-Titanium Instruments. J Endodont, 39, 2013, p. 919–923. [CrossRef]
  5. X.M. Hou, Y. Yahata, Y. Hayashi, A. Ebihara, T. Hanawa, H. Suda, Phase Transformation Behaviour and Bending Property of Twisted Nickel-Titanium Endodontic Instruments. Int. Endod J, 44, 2011, p. 253–258. [CrossRef]
  6. H.P. Lopes, C.N. Elias, M.V. Vieira, J.F.Jr. Siqueira, M. Mangelli, W.S. Lopes, V.T. Vieira, F.R. Alves, J.C. Oliveira, T.G. Soares, Fatigue Life of Reciproc and MTwo Instruments Subjected to Static and Dynamic Tests. J Endodont, 39, 2013, p. 693–696. [CrossRef]
  7. G. Plotino, A. Costanzo, N.M. Grande, R. Petrovic, L. Testarelli, G. Gambarini, Experimental Evaluation on the Influence of Autoclave Sterilization on the Cyclic Fatigue of New Nickel-Titanium Rotary Instruments. J Endod, 38, 2012, p. 222–225. [CrossRef]
  8. J.H. Ha, S.K. Kim, N. Cohenca, H.C. Kim, Effect of R-Phase Heat Treatment on Torsional Resistance and Cyclic Fatigue Fracture. J Endodont, 39, 2013, p. 389–393. [CrossRef]
  9. G. Gambarini, G. Plotino, N.M. Grande, D. Al-Sudani, M. De Luca, L. Testarelli, Mechanical Properties of Nickel-Titanium Rotary Instruments Produced with a New Manufacturing Technique. Int Endo J, 44, 2011, p.337–341. [CrossRef]
  10. H. P. Lopes, T. Gambarra-Soares, C.N. Elias, J.F.Jr. Siqueira, I.F. Inojosa, W.S. Lopes, V.T. Vieira, Comparison of the Mechanical Properties of Rotary Instruments Made of Conventional Nickel-Titanium Wire, M-Wire, or Nickel-Titanium Alloy in R-Phase. J Endodont, 39, 2013, p. 516–520. [CrossRef]
  11. J.J. Perez-Higueras, A. Arias, J.C. De La Macorra, Cyclic Fatigue Resistance of K3, K3XF, and Twisted File Nickel-Titanium Files Under Continuous Rotation or Reciprocating Motion. J Endodont, 39, 2013, p. 1585–1588. [CrossRef]
  12. G. Alexandrou, K. Chrissafis, Vasiliadis L, E. Pavlidou, E.K. Polychroniadis, Effect of heat sterilization on surface characteristics and microstructure of Mani NRT rotary nickel-titanium instruments. Int. Endod J 39, 2006, p. 770–778. [CrossRef]
  13. S. V. Correia, Estudo do comportamento em serviço de limas endodônticas superelásticas de NiTi. PhD Thesis (in Portuguese), Faculdade de Medicina Dentária, University of Lisbon, October 2009.
  14. Y. Yahata, T. Yoneyama, Y. Hayashi, A. Ebihara, H. Doi, T. Hanawa, H. Suda, Effect of Heat Treatment on Transformation Temperatures and Bending Properties of Nickel-Titanium Endodontic Instruments. Int Endod Journal, 42, 2009, p. 621–626. [CrossRef]
  15. G. Kuhn, L. Jordan, Microstructural Effects on Ni-Ti Endodontic Instruments Failure. J Phys IV, 11, 2001, p. 553–558.
  16. F.M. Braz Fernandes, J.P. Oliveira, A. Machado, N. Schell, XRD Study of NiTi Endodontic Files Using Synchrotron Radiation. Journal of Materials Engineering and Performance, 23, 2014, p. 2477–2481. [CrossRef]
  17. Y. Shen, H.M. Zhou, Y.F. Zheng, B. Peng, M. Haapasalo, Current Challenges and Concepts of the Thermomechanical Treatment of Nickel-Titanium Instruments. J Endodont, 39, 2013, p. 163–172. [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.