EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 22 (2015) MATEC Web of Conferences, 22 (2015) 05026 References
Open Access
Issue
MATEC Web of Conferences
Volume 22, 2015
International Conference on Engineering Technology and Application (ICETA 2015)
Article Number 05026
Number of page(s) 6
Section Chemical and Industrial Technology
DOI https://doi.org/10.1051/matecconf/20152205026
Published online 09 July 2015
  1. Li XinPing, Liu Shougong & Cao Xiaolong, et al. 2002. Development in the design of HV cable termination. Electric Wire and Cable, (3): 11–14. [Google Scholar]
  2. T. Ishikawa, K. Yasuda, S. Okabe S, Kaneko & S. Yanabu. Streaming Electrification Characteristics of Silicone Oil with Oil Temperature Increase. [Google Scholar]
  3. H. Yoshida. & S. Yanabu, 2003. The Breakdown Characteristics of the Silicone Oil for Electric Power Apparatus, ISH2003, Delft, Netherlands, August 25–29. [Google Scholar]
  4. T.C. Champion, F. & Marciano Agostinelli, R.D. 1995. Rosevear, Long term pre-qualification testing program on a 230kV XLPE cable system, IEEE Trans. POW. Del., 10: 10–17. [Google Scholar]
  5. T. Suzuki, S. Murakami. & S. Kobayashi. 1983. De-composition products of silicon liquid due to electric discharge, IEEE Trans. Electr. Insul., 18: 152–157. [CrossRef] [Google Scholar]
  6. Sihui Hu, Ruzhang Wang, Qichao Song & Yadong Li. 2006. The PD Characteristics of composite insulation for Polytetrafluoroethylene membrane silicone. High Voltage apparatus. (5):72–76. [Google Scholar]
  7. Liu Gang, Liu Yigang, Wang Chao & Yi Zepei. The study on evaluation model for Prefabricated HV stress cone of cable Terminations weakness based on finite element. Conference Record of the 2006 IEEE International Symposium on Electrical Insulation. pp: 486–489. [Google Scholar]
  8. Liland K B, Bjorke, A. Kornberg, Hvidstens Faremo H. & Bjerkan E. 2009. Failure Modes and Condition Assessment of High Voltage Oil Filled XLPE Terminations. 29th Electrical Insulation Conference Montreal, CANADA, MAY31-JUN03. [Google Scholar]
  9. Chen Chengwei, Liu Gang & Li Jian, et al. The Study on Evaluation Model for Water in Silicone Oil of Cable Termination and Simulate Experiment. Conference Record of the 2008 IEEE International Symposium on Electrical Insulation. pp: 712–715. [Google Scholar]
  10. Wang Yanwei, Wei Chengwen & Dai Jingxu. 2004. Study on mechanism of abnormal heat for high voltage cable end of Rolling 1344 line. High Voltage Engineering. 30(136): 65–98. [Google Scholar]
  11. Luo Zhenhai, Lu Guojun & Wang Xiaobing. 2007. Study on fever cause of Porcelain sets High Voltage Cable Terminal. High Voltage Engineering. 33(11): 240–244. [Google Scholar]
  12. Jliang Shen, Junhua Luo & Mei Tang. 2005. Analysis of Explosion Accident of 110 kV Power Cable Termination. High Voltage Apparatus. 31(11): 74–75. [Google Scholar]
  13. WG B1. 29 Guidelines for maintaining the integrity of XLPE cable accessories. [Google Scholar]
  14. Fei Liang, MacAlpine Mark & Zhicheng Guan. 2014. Formation of Dry-band in the Process of Pollution Flashover Based on Infrared Thermal Image Analysis. High Voltage Engineering. 40(1): 138–146. [Google Scholar]
  15. Jin Shao, Wuyan Hu & Fengming Jia. 2013. Application of infrared thermal imaging technology to condition-based maintenance of power equipment. High Voltage apparatus. 49(1): 126–133. [Google Scholar]
  16. Hongying He, Yingjian Yang, Jiangang Yao, Zhenglong Jiang & Yanping Qian. 2010. Influence Factors Research of Insulator Contamination Grades Detection Based on Infrared Image. High Voltage Engineering, (36): 1730–1737. [Google Scholar]
  17. Xingliang Jiang & Qiangfeng Xia. 2010. Influence of Contamination to Infrared Imaging Method Detecting Deterioration Insulators. High Voltage Engineering, (36):1619–1625. [Google Scholar]
  18. Yunsheng Wang. 2004. Diagnoses of overheat defectiveness of the cable head by infrared technique, High Voltage Engineering. (16): 24–28 [Google Scholar]
  19. Baoshu Li, Xiaohui Zhu, Shutao Zhao & Wendong Niu. 2006. HV Power Equipment Diagnosis Based on Infrared Imaging Analyzing. 2006 International Conference on Power System Technology, 1–4. [Google Scholar]
  20. Z. B. Zhao, Q. Gao & R. Li. 2005. Realization of IR temperature measurement in substation remote video monitoring system. Telecommunications for Electric Power System, China, (26): 27–32. [Google Scholar]
  21. Huangqiang Li & Yunlian Sun. 2009. Research on HV-Power Equipment Diagnosis by Infrared Image Edge Detection. Power and Energy Engineering Conference, pp: 1–4. [Google Scholar]
  22. Baoshu Li, Xiaohui Zhu, Shutao Zhao & Wendong Niu. HV Power Equipment Diagnosis Based on Infrared Imaging Analyzing. 2006 International Conference on Power System Technology, pp: 1–4. [Google Scholar]
  23. Xiaojuan Wu, Zhifang Cai, Qiang Yuan. 2007. Analysis of the cause abnormal heating cable terminal. Guangdong Electric Power. 20(9): 40–42 [Google Scholar]
  24. FU Jian. 2005. Infrared diagnosis for voltage-caused thermal faults of equipment. East China Electric Power, 3(35): 66–68. [Google Scholar]
  25. Zhuo Jinyu. Power Cable Structure Design. [Google Scholar]
  26. Ding Yang. The Synthesis and Application of new phosphorus-containing silicone flame retardant, Shaanxi University of Science and Technology, Master Thesis. [Google Scholar]
  27. Zhao Mingxing. 2007. The New Synthesis Process for Polydimethylsiloxane Zhengzhou University. 5. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.