| Issue |
MATEC Web Conf.
Volume 414, 2025
9th Scientific and Technical Days in Mechanics and Materials: Innovative Materials and Processes for Industrial and Biomedical Applications (JSTMM 2024)
|
|
|---|---|---|
| Article Number | 03007 | |
| Number of page(s) | 8 | |
| Section | Composite Materials, Polymers & Biomaterials | |
| DOI | https://doi.org/10.1051/matecconf/202541403007 | |
| Published online | 02 October 2025 | |
Tailoring the Mechanical and Thermal Properties of PEEK with Hydroxyapatite Addition for Enhanced Orthopedic Performance
1 Laboratoire Mécanique Appliquée et Ingénierie (LR-MAI) -ENIT, Tunisie
2 Université de Lyon, CNRS, Ingénierie des Matériaux Polymères, UMR 5223, INSA Lyon, Lyon 1, UJM, F-69621, Villeurbanne, France
3 Laboratoire de M´mécanique, Matériaux et Procédés, Université de Tunis, ENSIT, Tunisie
4 Institut Préparatoire aux Etudes d’Ingénieurs d’El-Manar. Université de Tunis El Manar, Tunisie
* Corresponding author: This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
This study focuses on developing bioactive PEEK composites for orthopedic and dental applications. While PEEK offers excellent strength, biocompatibility, and radiolucency, its biological inertness limits bone integration. Incorporating hydroxyapatite (HA) enhances PEEK’s bioactivity, improving osseointegration and bone cell adhesion for medical implants. The PEEK and PEEK/HA (20% HA) composites were fabricated using twin-screw extrusion and injection molding, ensuring uniform HA dispersion within the matrix. Scanning electron microscopy (SEM) revealed increased surface roughness in PEEK/HA composites due to HA particles, improving cell adhesion and tissue integration. Differential scanning calorimetry (DSC) indicated that HA acts as a nucleating agent, raising crystallinity from 31.89% to 42.86%, enhancing rigidity and thermal stability without altering the melting temperature. Mechanical testing showed that HA addition increased maximum stress by 10.94% and Young’s modulus by 30.07%. In fact, pure PEEK offers a maximum stress of 96.83 MPa, a modulus of 2.96 GPa and a strain of 54.9%, combining strength and elasticity. With 20% HA, the stress reaches 107.43 MPa and the modulus 3.85 GPa, increasing stiffness and strength, but reducing the strain to 35.04%. This balance between enhanced stiffness and reduced flexibility makes PEEK/HA composites suitable for load-bearing applications like orthopedic implants.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.