| Issue |
MATEC Web Conf.
Volume 391, 2024
22nd International Conference Diagnostics of Machines and Vehicles “Hybrid Multimedia Mobile Stage” (ICDMV 2023)
|
|
|---|---|---|
| Article Number | 01003 | |
| Number of page(s) | 8 | |
| Section | Engineering Creativity for Contemporary Europe | |
| DOI | https://doi.org/10.1051/matecconf/202439101003 | |
| Published online | 02 February 2024 | |
Parametric modelling of control cable fittings geometric configuration with interpolation of FEA results
1 Khmelnitskyi National University, 29016, Instytutska 11, Khmelnitskyi, Ukraine
2 Faculty of Mechanical Engineering, Bydgoszcz University of Life Sciences and Technology, 7, Kaliskiego str., 85-796, Bydgoszcz, Poland
* Corresponding author: kgolenko@gmail.com
Studying the behavior of control cable fittings (actually a pipe-type part) during radial crimping for fixation on the pipeline is a difficult task since it is necessary to control the presence of obvious plastic deformations: on the one hand, insufficient crimping can cause the fitting to break off from the cable conduit (axial loads over 100 kgf), and on other – the excessive crimping can block the operation of the cable (the core will jam). The selection of the optimal ratio of the fitting diameter and its wall thickness at different load values is the topic of a multi-parameter problem, and one of the ways of solving it will be presented in our research. To evaluate the nonlinear behavior of the Structural Steel NL Ansys material will be used Bilinear Isotropic Hardening stress-strain model with further interpolation of the Tangent Angle Coefficient (TAC) which is suggested as a new calculation parameter of pipe stress estimation.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.