Issue |
MATEC Web Conf.
Volume 385, 2023
The 15th International Scientific Conference of Civil and Environmental Engineering for the PhD. Students and Young Scientists – Young Scientist 2023 (YS23)
|
|
---|---|---|
Article Number | 01039 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/matecconf/202338501039 | |
Published online | 30 October 2023 |
Size effect of bonded area for bonded joints between ETICS with an acrylic thin-film plaster and sheet metal component
Faculty of Civil Engineering, Brno University of Technology, Veveri 331/95, 602 00 Brno, Czech Republic
* Corresponding author: Ales.Prucha@vut.cz
The issue of anchoring sheet metal components has been part of construction practice for a very long time. Sheet metal components can be found on most contemporary buildings and due to the increasing thickness of insulation the possibility of anchoring to the supporting substrate is a problem. This paper discusses the issue of the bonded joint size dependence on the load capacity for fastening sheet metal elements to ETICS facades. A thixotropic silane modified polymer adhesive was used for this research. It was concluded that the size has a significant effect on the load capacity of the joint and their dependence was described.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.