| Issue |
MATEC Web Conf.
Volume 385, 2023
The 15th International Scientific Conference of Civil and Environmental Engineering for the PhD. Students and Young Scientists – Young Scientist 2023 (YS23)
|
|
|---|---|---|
| Article Number | 01031 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/matecconf/202338501031 | |
| Published online | 30 October 2023 | |
Experimental testing of 3DCP reinforcement Wall segments
Faculty of Civil Engineering, Institute of Building Structures, Brno University of Technology, Veveri 331/95, 602 00 Brno, Czech Republic
* Corresponding author: Vojtech.Vanek2@vutbr.cz
The wall segments are formed using additive layer-on-layer technology. The concrete mix is therefore laid in layers and the final desired element is gradually formed. The manufactured columns are all of different shapes and reinforcements. The columns are adapted for lateral load testing, whereby they are subjected to three-point bending when loaded in service. A stress of 1 MPa is transmitted to these columns and the columns are progressively loaded with a horizontal force. The test is primarily to determine how much stress these columns can carry in the wall plane in tension bending. The results of the measurements are compared with brick masonry.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.