| Issue |
MATEC Web Conf.
Volume 373, 2022
10th edition of the International Multidisciplinary Symposium “UNIVERSITARIA SIMPRO 2022”: Quality and Innovation in Education, Research and Industry – the Success Triangle for a Sustainable Economic, Social and Environmental Development
|
|
|---|---|---|
| Article Number | 00068 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/matecconf/202237300068 | |
| Published online | 20 December 2022 | |
Management of occupational safety and health in the commissioning of defective work equipment in the manufacturing industry
1 INCDPM “Alexandru Darabont”, 35A Blvd Ghencea, 6th county, Bucharest 062692, Romania
2 University „ 1 Decembrie 1918” Alba-Iulia, Romania
* Corresponding author: anca.antonov@gmail.com
Work equipment must provide compliance with the essential safety and health requirements applicable from the design and manufacturing stage to ensure a high level of protection of social interests, safety and health at work, and environmental protection. Non-conformities are discovered during the initial commissioning of work equipment in some circumstances due to incorrect design and/or manufacture, resulting in unsafe and non-compliant equipment that is defective when placed on the market and marketed. The purpose of this article is to present the research findings. The goal was to assess the risks associated with the security aspects of digital paper and cardboard printing machinery, to ensure compliance with current safety and health regulations, and to limit the risk of operating defective products. The study offered research results on the establishment of safety and compliance conditions, in order to design a methodology for assessment and technical inspection of work equipment, based on risk assessment and taking into account the usual and anticipated use of the work equipment. Introduction on the market, to improve the efficiency of technical inspection and market surveillance operations by detecting and generating risk profiles for work equipment manufacturer non-conformity.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.