| Issue |
MATEC Web Conf.
Volume 370, 2022
2022 RAPDASA-RobMech-PRASA-CoSAAMI Conference - Digital Technology in Product Development - The 23rd Annual International RAPDASA Conference joined by RobMech, PRASA and CoSAAMI
|
|
|---|---|---|
| Article Number | 03012 | |
| Number of page(s) | 10 | |
| Section | Material Development | |
| DOI | https://doi.org/10.1051/matecconf/202237003012 | |
| Published online | 01 December 2022 | |
The influence of final coiling temperature on the microstructure and mechanical properties of high Ti-V HSLA steels
1 Department of Material Science and Metallurgical Engineering, University of Pretoria, South Africa
2 Department of Material Science and Engineering, University of Sichuan, China
3 Advanced Materials Division, Mintek, South Africa
* Corresponding author: rezajafarpour2010@gmail.com
In general, the strength-to-weight ratio is a marked property of high- strength low-alloy steel. The coiling temperature is an important process parameter in the control and improvement of final microstructure and mechanical properties. In this work, the effect of deformation and coiling temperature on microstructure and mechanical properties of high Ti- V microalloyed HSLA steels were investigated using the Gleeble 1500TM thermomechanical processing simulator. The samples were austenitised at 1150 ˚C for 300 s, then deformed in 4 passes at 1050, 1000, 950 and 900 ˚C. After final pass, the samples were cooled and isothermally held for 1800 s to simulate the coiling process at 550 and 650 ˚C. The results showed that at low coiling temperature (LCT) of 550 ˚C, the microstructures consisted of ferrite and bainite and also had higher hardness (304 HV).
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.