MATEC Web Conf.
Volume 367, 202221st Conference on Power System Engineering
|Number of page(s)||7|
|Published online||14 October 2022|
Measuring deformations of the fan blade by optical methods
University of West Bohemia, Faculty of Mechanical Engineering, Department of Power System Engineering, Univerzitní 2732/8, 301 00 Pilsen, Czech Republic
2 Department of Noise and Vibration, Research and Testing Institute Plzen Ltd., Tylova 1581/46, 301 00 Pilsen, Czech Republic
3 Department of Fluid Dynamics, Institute of Thermomechanics, Czech Academy of Sciences, Dolejškova 5, 182 00, Prague, Czech Republic.
* Corresponding author: firstname.lastname@example.org
Across industries, the demand for the ability to analyze components in operation and make decisions on repair based on the data obtained is growing rapidly. There is the potential to ensure safer operations while saving the cost of unnecessary new parts. A quick and relatively inexpensive method is a 3D scanner - the device that can scan a real component and create an accurate 3D model. For stationary cases - inspecting parts or assemblies - these are already established methods. In contrast, measurement of vibrations and deformations in operation is still not widespread and for turbomachinery, it can be a new direction of development.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.