Issue |
MATEC Web Conf.
Volume 364, 2022
International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2022)
|
|
---|---|---|
Article Number | 02012 | |
Number of page(s) | 6 | |
Section | Concrete Durability Aspects - Concrete Durability: Innovative Materials and Influences of Material Composition | |
DOI | https://doi.org/10.1051/matecconf/202236402012 | |
Published online | 30 September 2022 |
Durability of untreated fine recycled aggregate concrete: a literature review
Concrete Materials and Structural Integrity Research Unit, Department of Civil Engineering, University of Cape Town, South Africa
* Corresponding author: gmlare001@myuct.ac.za
Unlike natural aggregate particles, recycled concrete aggregates contain hardened cement paste phases and multiple interfacial transition zones. These differences in properties may be linked to a decrease in durability performance in recycled aggregate concrete. This paper presents a review of the literature published on the durability performance of concrete produced using untreated fine recycled concrete aggregate (fRCA). From the available literature, the durability performance of concrete made using fRCA is strongly linked to the w/b used and the porosity of the resulting concrete matrix. Water absorption, gas permeability, and chloride penetration were found to increase with fRCA replacement. A possible maximum replacement level of 30% was observed in this regard. Carbonation resistance was found to increase with fRCA replacement due to the presence of calcium hydroxide in fRCA samples.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.