| Issue |
MATEC Web Conf.
Volume 358, 2022
3rd International Symposium on Mechanics, Structures and Materials Science (MSMS 2022)
|
|
|---|---|---|
| Article Number | 01056 | |
| Number of page(s) | 4 | |
| DOI | https://doi.org/10.1051/matecconf/202235801056 | |
| Published online | 19 May 2022 | |
Preparation and Properties of Sn-TiO2 nanocomposite coatings
School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang. China
Sn-TiO2 nanocomposite coatings were prepared by sol-gel enhanced electrodeposition technique and the effect of c concentration on the performance of the composite coatings was investigated by adding different volumes of TiO2 sol to the electrolyte. The microscopic morphology and corrosion resistance of the coatings were characterized by XRD tests, SEM tests, hardness tests and a series of electrochemical tests. From the test results, it was found that the coating had the highest hardness value and the best corrosion resistance when the TiO2 sol was added at 15 mL/L; however, when the TiO2 sol concentration was too large, the corrosion resistance and hardness value of the Sn-TiO2 composite coating decreased significantly due to the destruction of the crystal structure and coating structure by the agglomerated TiO2 nanoparticles in the coating.
Key words: Nanocomposite / TiO2 sol / electrodeposition / coating
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.