| Issue |
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
|
|
|---|---|---|
| Article Number | 02016 | |
| Number of page(s) | 15 | |
| Section | Modelling and Simulation, Structural Optimization | |
| DOI | https://doi.org/10.1051/matecconf/202235702016 | |
| Published online | 22 June 2022 | |
Use of the Finite Element Method in the Prediction of Stresses and Strains in Roller Press Frames
AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, al. A. Mickiewicza 30, 30-059 Krakow, Poland
In the article the design solutions for the roller presses have been characterized. On this basis, several roller press models were selected, their CAD models were prepared and then the loads have been put on the roller press frames and other components of the presses. The results of a stress and strain analyses have been done using the finite element method. A comparison of individual solutions are presented. On the basis of the analysis performed, the construction of the considered object are rated and solutions aimed at improving the existing solutions are presented.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.