Issue |
MATEC Web Conf.
Volume 353, 2021
4th International Conference on Advances in Materials, Machinery, Electronics (AMME 2021)
|
|
---|---|---|
Article Number | 01021 | |
Number of page(s) | 4 | |
DOI | https://doi.org/10.1051/matecconf/202135301021 | |
Published online | 20 December 2021 |
Analysis and optimization of positioning scheme for machining 2.5mm groove
1 School of Shenyang Institute of technology, Liaoning, China
2 Liaoning Key Laboratory of physical information fusion and intelligent manufacturing of CNC machine tools, Liaoning, China
* Corresponding author: 290910113@qq.com
The front bracket of a certain type studied in this subject is a part of the braking system and plays an important role in the braking system. The main parts of the front support are grooved surface, 44.3mm cylindrical surface, M16 threaded hole plane, M16 threaded hole and Ф 12 holes and 2.5mm grooves. These parts are matched with the brake plate, so they have high dimensional accuracy and geometric accuracy. The main content of this paper is to optimize the positioning scheme of the front support when the machining height is 2mm groove, and improve the machining accuracy of 2mm groove.
© Owned by the authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.