| Issue |
MATEC Web Conf.
Volume 342, 2021
9th edition of the International Multidisciplinary Symposium “UNIVERSITARIA SIMPRO 2021”: Quality and Innovation in Education, Research and Industry – the Success Triangle for a Sustainable Economic, Social and Environmental Development”
|
|
|---|---|---|
| Article Number | 02016 | |
| Number of page(s) | 11 | |
| Section | Challenges in Mining, Mineral Processing, Surveying and Civil Engineering | |
| DOI | https://doi.org/10.1051/matecconf/202134202016 | |
| Published online | 20 July 2021 | |
The use of modern technologies in the surveying field
1
Banat University of Agricultural Sciences and Veterinary Medicine “King Michael I of Romania” from Timisoara, Romania
2
University of Petrosani, Romania
* Corresponding author: mihai_herbei@yahoo.com
In order to achieve or complete the 1: 1.000 scale situation plan and the digital terrain model for the Timişoara - Sibiu highway section, and given the difficult access conditions in the project area, it was decided to use photogrammetric techniques for extraction of spatial information needed for mapping. In order to achieve the mapping requirements at a scale of 1: 1.000, the following activities were performed: Realization of the geodetic support network; Realization of the aerial photography project; Making pre-marking points in areas without clear details or other location possibilities; Simultaneous aerial photography of sub-blocks at different flight heights to ensure a 12 cm pixel and simultaneous laser scanning with LiDAR system; Identification of marking and pre-marking points on the subblock frames; Performing GPS measurements to determine the coordinates of landmarks and photogrammetric pre-marking; LIDAR data processing using permanent GPS stations to obtain coordinates in the ETRS89 system and transform them into the STEREO70 system and Black Sea reference plan 75; Calibration of LIDAR data; Filtering LIDAR data; Realization of aerotriangulation on subblocks or bands; Stereo restitution of planimetric and altimetric details for 1: 1.000 scale (3D mode); Transforming 3D plans into 2D plans; Editing and elaborating topographic plans.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.