| Issue |
MATEC Web Conf.
Volume 340, 2021
VII International Russian - Kazakhstan Conference “Chemical Technologies of Functional Materials” (RKFM 2021)
|
|
|---|---|---|
| Article Number | 01054 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/matecconf/202134001054 | |
| Published online | 08 July 2021 | |
Development of composite electrode materials based on nickel oxide for additive manufacturing of fuel cells
1 Institute of Solid State Chemistry and Mechanochemistry SBRAS, Kutateladze St. 18, Novosibirsk, 630128, Russia
2 Institute of Automation and Electrometry SBRAS, Academician Koptyug Av. 1, Novosibirsk, 630090, Russia
* Corresponding author:artembagishev15@gmail.com
In this work, a new composition of a paste based on nanosized nickel oxide (NiO) for jet-based 3D printing has been developed and investigated. The optimal parameters of anode paste with necessary viscosity and NiO loading have been found for printing by using custom made laboratory 3D printer. Experiments have been carried out to print two-and three-dimensional test objects using the developed ceramic paste; printing modes have been investigated to fabricate objects of a given shape and size with laser sintering of the deposited layers. Experiments have been conducted for the selection of optimal temperature conditions for the post-processing of the printed samples.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.