Issue |
MATEC Web Conf.
Volume 328, 2020
XXII. International Scientific Conference – The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2020 (AEaNMiFMaE-2020)
|
|
---|---|---|
Article Number | 05001 | |
Number of page(s) | 5 | |
Section | Visualization of Flow | |
DOI | https://doi.org/10.1051/matecconf/202032805001 | |
Published online | 18 November 2020 |
PIV Observation of the Baffle Position in the Flue Gas Tract for Particle Flowing
The department of power engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia
* Corresponding author: alexander.caja@fstroj.uniza.sk
Solid fuel combustion accompanies particulate matter production. These particles negatively affect human health, so ways of capturing them are being sought. Local heat sources are a major producer, with this article focusing on the flue gas tract of this heat source. A baffle has been placed in the flue gas tract, the position of which is changing. It is observed the impact of particulate matter flowing through this baffle with a focus on the settling areas. Particles are trapped in the settling areas and do not flow further through the flue gas tract. Particulate matter flowing was investigated by the visualization method called Particle image velocimetry (PIV). Visualizing the flow allows to get a figure of the flow and a dynamic record of the state of the object. The result of the visualization is the assessment of the monitored flow, the determination of its trajectory and streamlines.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.