| Issue |
MATEC Web Conf.
Volume 328, 2020
XXII. International Scientific Conference – The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2020 (AEaNMiFMaE-2020)
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 8 | |
| Section | Modelling and Simulation in Fluid Mechanics and Energy | |
| DOI | https://doi.org/10.1051/matecconf/202032802003 | |
| Published online | 18 November 2020 | |
Numerical and Analytical Calculation of Flow During Steam Blowing
1 Doosan Škoda Power s.r.o., Experimental Research, Tylova 1/57, Pilsen, Czech Republic
2 Doosan Škoda Power s.r.o., Thermodynamics, Tylova 1/57, Pilsen, Czech Republic
* Corresponding author: michal.hoznedl@doosan.com
In the paper results are described of numerical simulations of the flow during the steam blowing between the boiler drum and the outlet to the atmosphere. Numerical flow simulations are compared to the analytical approach that best describes the flow during the blowing, i.e. the Fanno flow. The proposed methodology of analytical calculation can be, with a reasonable deviation from reality, used in control of velocity and flow in the pipe outlet cross-section.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.