Issue |
MATEC Web Conf.
Volume 322, 2020
MATBUD’2020 – Scientific-Technical Conference: E-mobility, Sustainable Materials and Technologies
|
|
---|---|---|
Article Number | 01054 | |
Number of page(s) | 9 | |
Section | E-mobility, Sustainable Materials and Technologies | |
DOI | https://doi.org/10.1051/matecconf/202032201054 | |
Published online | 14 October 2020 |
Stator Winding Fault Detection Using External Search Coil and Artificial Neural Network
1 Federal Technological University of Paraná, CornélioProcópio, Paraná, Brazil
2 Research Centre in Digitalization and Intelligent Robotics (CeDRI), InstitutoPolitécnico deBragança, Portugal
* Corresponding author: apf@ipb.pt
This paper presents a methodology for winding stator fault detection of induction motors, using an external search coil, which is a noninvasive technique and can be applied during motor operation. The dispersion magnetic flux of the motor operating in abnormal conditions induces a voltage in the search coil that differs from a reference pattern corresponding to the healthy stator winding. Experimental data were obtained in a test bench using a 0.75 kW three-phase squirrel-cage induction motor with the stator winding modified to allow the introduction of short circuits. This work considered short circuits in one phase, involving 1%, 3%, 5% and 10% of the turns, with the motor loaded with a varying torque. Fault diagnosis is obtained through two models of artificial neural networks, implemented with the signals in the time domain. The obtained results demonstrated that the developed methodology presents difficulties in predicting short circuits in incipient stages, but for short circuits of higher severity, the behaviour improved substantially, being 100% successful for faults with 10% turns short-circuited.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.