MATEC Web Conf.
Volume 313, 2020Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2020
|Number of page(s)||6|
|Published online||16 April 2020|
Analysis of the stability of the outer partition of a steel frame house using FEM
Czestochowa University of Technology, Faculty of Civil Engineering, Akademicka Street 3, 42-200 Częstochowa, Poland
* Corresponding author: firstname.lastname@example.org
The subject of the analysis is a separate fragment of the external partition located in the ground floor of a residential building made in the technology of light steel skeleton without stiffening plating. The motivation to carry out this analysis is, among others Investors' growing interest in alternative solutions to traditional single-family housing. The selection of the considered fragment was made on the basis of maximum displacements obtained as a result of numerical analysis carried out in Robot Structural. Then, for the selected structural element of the wall, three calculation models in the Ansys program for the assessment of bending - torsional analysis were made. The calculation models adopted for the calculations differed in the way in which the bracing used were assembled. One of them included the author's own development of an insert stiffening the transverse profile at the bracing assembly site. The results of the calculations showed the legitimacy of strengthening the structure when the stiffening plating is removed.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.