Issue |
MATEC Web Conf.
Volume 310, 2020
4th International Scientific Conference Structural and Physical Aspects of Construction Engineering (SPACE 2019)
|
|
---|---|---|
Article Number | 00038 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/matecconf/202031000038 | |
Published online | 05 March 2020 |
Hygrothermal performance of timber-concrete composite panels – theoretical investigation
1
Faculty of Civil Engineering, Institute of Structural Engineering, Technical University of Košice, Slovakia
2
Faculty of Art, Department of Architecture, Technical University of Košice, Slovakia
* Corresponding author: viktoria.bajzecerova@tuke.sk
The concrete layer as a part of the timber-concrete composite (TCC) element makes it possible to maintain the accumulated heat and thus reduce the energy required for heating. Especially for buildings used for a sauna, swimming pools or wellness. In the TCC cross-section due to uneven thermal and humidity deformation of both materials, additional stresses occur. It can lead to the failure of partial cross-sections or composite connection. The aim of the research is to investigate the influence of changing humidity and temperature conditions of the environment on the composite adhesively bonded TCC panels without the influence of other phenomena such as mechanical stress or the effect of concrete shrinkage. The paper presents the results of the preliminary theoretical investigation before the realization of measurements on prepared specimens.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.