| Issue |
MATEC Web Conf.
Volume 310, 2020
4th International Scientific Conference Structural and Physical Aspects of Construction Engineering (SPACE 2019)
|
|
|---|---|---|
| Article Number | 00017 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/matecconf/202031000017 | |
| Published online | 05 March 2020 | |
Propagation conditions of an eccentric crack in a semi-circular disk loaded in I+II mixed mode
1
Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics, Veveří 331/95, 602 00 Brno, Czech Republic
2
Institute of Physics of Materials, Czech Academy of Sciences, v. v. i., Žižkova 513/22, 616 62 Brno, Czech Republic
* Corresponding author: malikova.l@fce.vutbr.cz
Multi-parameter fracture mechanics concept is applied to investigate crack propagation conditions during a three-point bending (3PB) test performed on an asymmetrical semi-circular disk under I+II mixedmode loading. The asymmetry is represented by an eccentricity of the angled crack as well as by different distances of both supports during the 3PB test from the middle of the specimen. The Williams series expansion is used for the crack-tip stress field approximation and fracture response of the crack is assessed by means of the combination of the numerical and analytical solution. Comparison between the individual configurations is carried out and discussion on the importance of the higher-order terms considered in the Williams expansion for various cases of asymmetry is presented.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.