MATEC Web Conf.
Volume 310, 20204th International Scientific Conference Structural and Physical Aspects of Construction Engineering (SPACE 2019)
|Number of page(s)||7|
|Published online||05 March 2020|
The fatigue stress on laser welded joints of DC06EK steel
FMMR TUKE, UMIK, Letná 9, 04402 Košice, Slovensko
2 Jožef Stefan Institute, Ljubljana, Slovenia
* Corresponding author: maria.mihaliková@tuke.sk
The paper analyses the influence of the fatigue characteristics of laser welding steels sheets. The combination of laser welded steel sheets DC06EK has been subjected to fatigue stress testing. To assess the condition of the material under the cyclic stress and to determine the material characteristics such as fatigue or resp. fatigue time limit was performed according to STN 42 0363. Fatigue tests were performed on the test piece. The experimental material had a laser weld with a rough surface. The test specimens were subjected to a pulsating positive disappearing thrust at a constant value of the coefficient of unbalance of 0‹R‹1 and a frequency of 25 Hz. The fatigue limit was determined at 260 MPa. The analysis of fracture surfaces showed on the sides of the weld joint the formation of a de-cohesive fracture. The resulting test values graphically presents stress-number curve.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.