| Issue |
MATEC Web Conf.
Volume 305, 2020
9th International Symposium on Occupational Health and Safety (SESAM 2019)
|
|
|---|---|---|
| Article Number | 00064 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/matecconf/202030500064 | |
| Published online | 17 January 2020 | |
Research on the use of modelling and computer simulation for metal mining structures in order to increase quality and safety
University of Petrosani, 20 University street, 332006, Petrosani, Romania.
* Cosmin Vitan: vitan.daniel.cosmin@gmail.com
3D representations using assisted design and computer simulations allow determining the geometric characteristics of critical sections needed for analytical calculation. Also, these representations form the basis of meshing necessary for the finite element calculation.
The purpose of this paper is to perform the metal structure verification, both by classical analytical calculation and by the finite element method, as well as to validate these calculations by computerized simulation.
The calculation performed on this metallic structure involves the analytical determination of stresses and, implicitly, of safety coefficients, which constitute a verification of metal structure.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.