Issue |
MATEC Web Conf.
Volume 305, 2020
9th International Symposium on Occupational Health and Safety (SESAM 2019)
|
|
---|---|---|
Article Number | 00025 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/matecconf/202030500025 | |
Published online | 17 January 2020 |
Designing and using robots for performing inspections in potentially explosive atmospheres
National Institute for Research and Development in Mine Safety and Protection to Explosion – INSEMEX, 32-34 G-ral Vasile Milea street, 332047, Petrosani, Hunedoara county, Romania
* Corresponding author: cosmin.colda@insemex.ro
Directive 2014/34/EU ATEx regulates the placement on the European market of equipment and technical installations for use in potentially explosive atmospheres. The current article has as purpose to present the manner of choosing types of protection for designing robots intended to be used for performing inspections in atmospheres with explosion hazard. The safety of workers has led to the development of technologies required for simplifying and safe performance of inspections in areas with explosion hazard.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.