| Issue |
MATEC Web Conf.
Volume 289, 2019
Concrete Solutions 2019 – 7th International Conference on Concrete Repair
|
|
|---|---|---|
| Article Number | 10012 | |
| Number of page(s) | 5 | |
| Section | Case Studies | |
| DOI | https://doi.org/10.1051/matecconf/201928910012 | |
| Published online | 28 August 2019 | |
Research and practices of large composite external wall panels for energy saving prefabricated buildings
Technical Center, China State Construction Engineering Corporation, Beijing, 101300, China
* Corresponding author: yunxing_shi@sina.com
The production process and application of large composite external wall panels (composite panels for short) are introduced in this paper. Composite panels with both load bearing and thermal insulation were formed by pouring normal concrete (NC) and ceramsite foamed concrete (CFC) continuously according to particular technological requirements, which made two layers into a seamless whole. The layers of NC and CFC are for load bearing and thermal insulation respectively. The composite panels were manufactured in the scale of industrial production, and applied to several energy saving prefabricated buildings successively, instead of polystyrene sandwich composite panels (sandwich panel for short) as external wall panels. There are several obvious advantages of the composite panel over the sandwich panel or outer benzoic board. Firstly, it solved the problems of durability of polystyrene and the complex production process of the sandwich pane, the production process of the external wall was thus greatly simplified. In addition, the fire risk was much reduced.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.