MATEC Web Conf.
Volume 284, 201929th International Conference on Structural Failures
|Number of page(s)||11|
|Section||Diagnostics in Safety Evaluation of Structures|
|Published online||10 July 2019|
The TLS technique as a way of identification and measurement of damaged elements of a historic sacral building
Institute of Building Engineering, Faculty of Geodesy, Geospatial and Civil Engineering University of Warmia and Mazury in Olsztyn, 10-724 Olsztyn, Heweliusza str. 4, Poland
* Corresponding author: firstname.lastname@example.org
3D terrestrial laser scanning (TLS) is a modern measurement technique which enables to obtain a large amount of data in short time. The gathered data is very detailed, thus the scope of its use is vast. Therefore scanners other measurement devices which results in considerable acceleration of stock-taking work. This approach enables to prepare a documentation of a building or to make an assessment of its technical condition using only a 3D cloud of points. Additionally, flexibility of data and advanced computer programmes make it possible to use such data in many sectors, not only in the building trade. The paper shows the issue of using a 3D terrestrial laser scanner ant the TLS (Terrestrial Laser Scanning) technique for identification and measurement of damaged elements on the example of a historical sacral building.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.