Issue |
MATEC Web Conf.
Volume 282, 2019
4th Central European Symposium on Building Physics (CESBP 2019)
|
|
---|---|---|
Article Number | 02065 | |
Number of page(s) | 7 | |
Section | Regular Papers | |
DOI | https://doi.org/10.1051/matecconf/201928202065 | |
Published online | 06 September 2019 |
Thermal and moisture properties of calcium silicate insulation boards
Tampere University, Building Physics, 33720 Tampere, Finland
* Corresponding author: olli.tuominen@tuni.fi
The purpose of this research was to determine thermal and moisture properties of calcium silicate insulation boards available on the Finnish market. Ruggedness testing and test arrangement development were done related to the pressure plate test, which was used to measure desorption isotherms in capillary range. Four calcium silicate and one calcium hydroxide board were examined. The determined material properties are water vapour permeability, water absorption coefficient, capillary saturation water content, moisture sorption isotherm in hygroscopic and capillary range, thermal conductivity and specific heat capacity. Ruggedness tests and development were done to the pressure plate measurement method. Capacitance needles were tested as a method to evaluate the state of equilibrium and different vacuum saturation methods were tested.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.