Issue |
MATEC Web Conf.
Volume 279, 2019
10th International Scientific Conference Building Defects (Building Defects 2018)
|
|
---|---|---|
Article Number | 02014 | |
Number of page(s) | 6 | |
Section | Mechanical and Materials Engineering | |
DOI | https://doi.org/10.1051/matecconf/201927902014 | |
Published online | 12 April 2019 |
Reconstruction of the terrazzo surface in the exterior
Vysoké učení technické v Brně, Fakulta stavební, Ústav Technologie, mechanizace a řízení staveb, Veveří 331/95, Brno, Czech Republic
Corresponding author: novotny.m1@fce.vutbr.cz; novotny.m1@seznam.cz
The article deals with terrazzo surface that is done in the exterior and which shows defects and faults after execution. It was an entry portal of an unnamed institution where the placed surface began to show flaws more or less immediately after laying. The article simply provides a research of the problem, deals with the proposed procedure and presents the results of the technology supervision. Currently, after the second execution, the surface again shows defects and the way of their remedy will be addressed. The article also presents the basic aspects that need to be respected and not neglected when this type of surface is realized. Terrazzo is primarily an interior material (in our conditions), but it is also possible to make it in the exterior – it is a special kind of concrete mixture. The article tries to summarize the issue and provide basic information about the problem and its solutions.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.