| Issue |
MATEC Web Conf.
Volume 276, 2019
International Conference on Advances in Civil and Environmental Engineering (ICAnCEE 2018)
|
|
|---|---|---|
| Article Number | 02016 | |
| Number of page(s) | 14 | |
| Section | Construction Management | |
| DOI | https://doi.org/10.1051/matecconf/201927602016 | |
| Published online | 15 March 2019 | |
Risk assessment on occupational accident of apartment building structural work with Failure Mode and Effect Analysis (FMEA) method
Department of Civil Engineering, Universitas Jember, Jember, Indonesia
* Corresponding author: ratnaningsihanik@gmail.com
The apartment is a vertical building used for residential purposes. It is included in a high rise building category with high occupational risk accident level due to its work complexity, or high elevation factors. This research discussed the risk assessment of occupational accident at one of the apartment constructions in Surabaya in order to determine its dominant risk factors and mitigation. Failure Mode and Effect Analysis (FMEA) method was applied to this research. It is a risk assessment method based on severity, occurrence, and detection. Following the relevant assessment, it resulted in 3 types of occupational accidents with the highest Risk Priority Number, namely height work accident, falling material from tower crane, and risk of landslide excavation.
© Owned by the authors, published by EDP Sciences, 2012
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.