MATEC Web Conf.
Volume 276, 2019International Conference on Advances in Civil and Environmental Engineering (ICAnCEE 2018)
|Number of page(s)||8|
|Published online||15 March 2019|
Finite element analysis of the effect M/V ratios on punching shear strength of edge slabcolumn connections of flat plate structure
1 Department of Civil Engineering, Universitas Udayana, Denpasar, Indonesia
2 Department of Civil Engineering, Universitas Mahasaraswati Denpasar, Denpasar, Indonesia
* Corresponding author: firstname.lastname@example.org
The occurrence of unbalanced moment in edge slab-column connections of flat plate structure cannot be avoided and increase the slab shear stress around the column. This paper investigates the effect of M/V ratio on punching shear strength of edge column-slab connections using finite element analysis. The Concrete Damage Plasticity (CDP) and truss model in Abaqus were used to model the nonlinear behavior of concrete and reinforcement, respectively. Ten values of the M/V ratio were applied to a subassembly edge connection model which was part of a properly design of a 5 story flat plate structure. The shear strength prediction of ACI 318-14 code on the effect of unbalanced moment in edge column-slab connection was also studied. The analysis results show that the effect of unbalanced moment on shear strength is not significant for M/V ratio less than 0.3. However, for M/V ratio greater than 0.3, the shear strength is reduced in an exponential order. The ACI 318-14 code overestimates prediction on connection’s shear strength for the M/V ratio less than 0.3. The code predictions are in a good agreement with the analysis results for the edge connection with the M/V ratio greater than 0.3.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.