Issue |
MATEC Web Conf.
Volume 275, 2019
1st International Conference on Advances in Civil Engineering and Materials (ACEM1) and 1st World Symposium on Sustainable Bio-composite Materials and Structures (SBMS1) (ACEM2018 and SBMS1)
|
|
---|---|---|
Article Number | 04005 | |
Number of page(s) | 4 | |
Section | Road and Bridge Engineering | |
DOI | https://doi.org/10.1051/matecconf/201927504005 | |
Published online | 13 March 2019 |
Experimental Research on Fuel Oil Corrosion Resistance of Asphalt Mixtures
School of Civil Engineering, Nanjing Forestry University, Nanjing, Jiangsu 210037, China
* Li Qiang: liqiang2526@njfu.edu.cn
Asphalt mixtures were immersed in the fuel oil to study the oil corrosion resistance. The mechanical performance of asphalt mixtures in the oil was evaluated by the observation, mass loss measurement, Marshall stability test and splitting strength test. Effects of immersion time, binder types, and anti-oil corrosion additive content were analyzed. It is found that there is the evident stripping after immersing the mixture in the oil. The stability test and strength significantly decrease. Using the anti-oil corrosion additive can effectively improve the mechanical performance of asphalt mixtures in the oil. It still can satisfy the criteria after immersing for 7 days. Finally, the optimum anti-oil corrosion additive content of 0.4% is recommended.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.