| Issue |
MATEC Web Conf.
Volume 267, 2019
2018 2nd AASRI International Conference on Intelligent Systems and Control (ISC 2018)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 4 | |
| Section | Control and Automation | |
| DOI | https://doi.org/10.1051/matecconf/201926701007 | |
| Published online | 11 February 2019 | |
Automatic Program of Gravity tide Pre-processing
North China University of Science and Technology, Tangshan, 063000
Author: Tian Guie (1980-), women, Mainly engaged in geodetic survey, tidal theory and tidal processing, etc.
E-mail: tianguie@163.com
In order to improve efficiency of pre-processing gravity observations, the theoretical tides are simulated on the basis of the foregone tidal parameters, and the simulating gravity observations are obtained by combining the local atmospheric gravity, the pole gravity and the length of day gravity. Based on the gravity observations, repairs the abnormal data such as jumps, steps and spikes in gravity observations. In this paper, the software FTsoft, which can automatically identify and repair data such as jumps, steps and spikes and other abnormal data, is designed and implemented on the Matlab platform, which improves the work efficiency. Comparing the results of treatment with FTsoft and Tsoft, it is found that the standard deviation of the result of Ftsoft is smaller than Tsoft, it further proved that Ftsoft is a effective method of pre-processing gravity tides.
Key words: Gravity tide / FTsoft / Automatic pre-processing / Matlab
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.