MATEC Web Conf.
Volume 265, 2019International Geotechnical Symposium “Geotechnical Construction of Civil Engineering & Transport Structures of the Asian-Pacific Region” (GCCETS 2018)
|Number of page(s)||5|
|Section||Soil Behavior and Geomechanics|
|Published online||30 January 2019|
The study of the influence of the rock mass heterogeneity on the stress-strain state of the shaft lining
National University of Science and Technology MISIS (Moscow Institute of Steel and Alloys), 119991, Leninskij Av., 4, Moskow, Russia
2 VostokCoal Management Company, 143084, estate 100, “Residence on Rublevka” Business Center, Usovo, Odinstovsky District, Moscow Region, Russia
* Corresponding author: firstname.lastname@example.org
Shafts often cross sections of a layered mass of rocks of different strength during the sinking. The article deals with the design case of interaction of monolithic concrete lining in the bottomhole zone of the shaft with a mass containing a rock layer with low stress-strain properties. To study its influence, spatial numerical models have been developed, which allowed us to consider several indicative positions of the «weak» layer referred to the shaft lining. The analysis of calculation results shows that in case of direct contact of the support with a «weak» layer, the increase in stress intensity in it can reach 5-fold values and is determined by the thickness of the «weak» layer and its stress-related characteristics. The most effective control action in this context is the advance hardening of the «weak» layer before its expo-sure during the sinking.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.