MATEC Web Conf.
Volume 262, 201964 Scientific Conference of the Committee for Civil Engineering of the Polish Academy of Sciences and the Science Committee of the Polish Association of Civil Engineers (PZITB) (KRYNICA 2018)
|Number of page(s)||7|
|Published online||30 January 2019|
Application of the ‘CPT 2012’ model of AFNOR standard for column design in Poland – Jazowa case study
Faculty of Civil and Environmental Engineering, Department of Geotechnics, Geology and Marine Civil Engineering, Gdańsk University of Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland
* Corresponding author: email@example.com
This paper presents the ‘CPT 2012’ model incorporated into the AFNOR NF P94-262:2012-07, French standard for pile design fully compatible with Eurocode 7, to the wider Polish audience. The bearing capacity of three reference columns for Vistula Marshlands have been calculated according to ‘CPT 2012’ model and AFNOR recommendations. Then, the design resistances have been compared with ultimate column bearing capacity measured during static load tests conducted on reference columns. The results of comparison are discussed and the discrepancies between measured and calculated bearing capacities are shortly commented.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.