Issue |
MATEC Web Conf.
Volume 262, 2019
64 Scientific Conference of the Committee for Civil Engineering of the Polish Academy of Sciences and the Science Committee of the Polish Association of Civil Engineers (PZITB) (KRYNICA 2018)
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 6 | |
Section | Hydroengineering | |
DOI | https://doi.org/10.1051/matecconf/201926201001 | |
Published online | 30 January 2019 |
Dynamic response of Zelazny Most tailings dam to mining induced extreme seismic event occurred in 2016
Institute of Hydro-Engineering, Polish Academy of Sciences, ul. Kościerska 7, 80-328 Gdańsk, Poland
* Corresponding author: a.korzec@ibwpan.gda.pl
The paper deals with the stability analysis of tailings dam subjected to dynamic loading induced by mining shocks which occurred in neighbouring copper mine. The main goal of the paper was to model the dynamic response of the dam during two extreme paraseismic events which occurred in 2016 based on accelerograms recorded at the dam toe. Dynamic response of the tailings dam was calculated using finite element method and the implicit time-integration method implemented in commercial codes. The boundary condition corresponding to dynamic loading was determined by deconvolution procedure. The error analysis showed that most precise signal reproduction is achieved while using target signal with peak value reduced by 40% as a test signal. Both acceleration and displacement time-series were successfully reproduced. Moreover, the stability analysis was conducted for five independent signals with design peak horizontal acceleration and showed that no permanent displacements should occur. The temporary horizontal displacement of the dam crest should not exceed 13 mm, assuming equivalent linear material model.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.