MATEC Web Conf.
Volume 258, 2019International Conference on Sustainable Civil Engineering Structures and Construction Materials (SCESCM 2018)
|Number of page(s)||6|
|Section||Green Construction Materials and Technologies, Environmental Impact and Green Design, Local and Recycled Materials|
|Published online||25 January 2019|
Design and FE Modeling of UPVC Corrugated Hollow Roofing Sheet
Mechanical Engineering Department, Faculty of Engineering, Atma Jaya Catholic University of Indonesia, Jalan Jenderal Sudirman 51 Jakarta 12930, Indonesia
* Corresponding author: email@example.com
The corrugated roofing sheet of UPVC polymer material is the potential material to replace common roof materials that has been developed in Indonesia. This study describes the design of the roof profile and analysis of the roof structure to static load. The resulting roof profile is a hollow corrugated roofing sheet with five crests and four valleys. The effective width is 860 mm, 10 mm cavity thick, and 45 mm peak height. The finite element model of the hollow UPVC corrugated sheets roof structure shows that the roof structure is capable of withstanding the static load/ mass of 133 kg equivalent of two applicators and capable of withstanding the wind lift force equivalent to 99 km/ h.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.