MATEC Web Conf.
Volume 256, 2019The 5th International Conference on Mechatronics and Mechanical Engineering (ICMME 2018)
|Number of page(s)||5|
|Section||Electronics and Electrical Engineering|
|Published online||23 January 2019|
Research and Experimental of MRI RF High Power Bridge
1 Xingyi Normal University for Nationalities, Xingyi, Guizhou, China
2 Xingaoyi Medical Equipment Co. Ltd ; Ningbo, China
A micro-scale 3dB high power RF (Radio Frequency) balance 4 Ports Bridge of MRI (Magnet Resonator Imaging) is realized with 3D PCB manufacturing and integrated capacity and theoretical calculation in this paper . At first a analysis method is proposed based on transmission line theory of the 1/4-wavelength and the lump and transmission parameters, and the transmisson line length and lump components of capacitors value are gotted for this micro-scale bridge. Then this Micro-Balance Bridge (MBB) manufacturing with FR4 and overall size is 100mm 60 mm 1 mm, and it size reduce 1/3 compared with plane bridge. MBB could be achieved 2 ways amplitude balance is about 0.1dB, phase balance is 1 , insert loss is about 0.3dB, flatness is not more than 0.01dB on the operate frequency of 64MHZ 5MHZ. This bridge could be supported input pulse power more than 1000 W by temperature experiment result. Use MBB integrate into the MRI systems and make imaging experiment and could reduce 20% imaging time from 1.2 ms to 900us, and it has good efficiency and homogeneity.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.