MATEC Web Conf.
Volume 254, 2019XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|Number of page(s)||12|
|Section||Modelling of Structural Materials, Composites and Nanomaterials|
|Published online||15 January 2019|
Tests of mechanical properties of semicrystalline and amorphous polymeric materials produced by 3D printing
Politechnika Częstochowska, Wydział Inżynierii Mechanicznej i Informatyki, 42-200 Częstochowa, Poland
* Corresponding author: firstname.lastname@example.org
The article presents the results of tests of physical properties of samples from semi-crystalline and amorphous polymeric materials produced using 3D printing. Samples were produced using 3D printing technology on the SIGNAL -ATMAT printer. The following polymeric materials were used to make the samples: TPU thermoplastic polyurethane elastomer, ABS acrylonitrile-butadiene-styrene copolymer, Laywood, PET ethylene terephthalate, PLA poly (lactic acid). The materials were tested for their mechanical properties. The hardness was determined by the Shore method and the ball-pressing method. The tensile strength also was determined. The research samples were subjected to visual analysis on a Keyence microscope to analyze the breakthrough site.
Key words: tensile strength / hardness / polymer materials / 3D print
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.