| Issue |
MATEC Web Conf.
Volume 239, 2018
Siberian Transport Forum - TransSiberia 2018
|
|
|---|---|---|
| Article Number | 01009 | |
| Number of page(s) | 4 | |
| Section | Mechanical and Energy Transport Systems | |
| DOI | https://doi.org/10.1051/matecconf/201823901009 | |
| Published online | 27 November 2018 | |
The improvement of composite plates’ indicators from cotton and flax spinning waste by modification of raw materials
1 Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
2 Kostroma state university, 156005, Kostroma, Russia
* Corresponding author: i.susoeva@yandex.ru
The article is devoted to solve the problem of modification of the non-returnable cotton and flax spinning waste in order to improve the physical and mechanical characteristics of composite heat-insulating plates based on these wastes. The modification of the vegetable filler with a 1% solution of sulfuric acid made it possible to increase the physical and mechanical indicators of plates. The thermal insulation properties of the composite plate material with some soft acid modification of the filler did not change significantly.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.