| Issue |
MATEC Web Conf.
Volume 238, 2018
International Conference on Novel Functional Materials (ICNFM2018)
|
|
|---|---|---|
| Article Number | 02011 | |
| Number of page(s) | 4 | |
| Section | Composite, Oxide and Ultrafine Materials | |
| DOI | https://doi.org/10.1051/matecconf/201823802011 | |
| Published online | 26 November 2018 | |
Investigation of Chemical Cleaning of Supercritical Superheater Oxide Scale
1
Guodian Science and Technology Research Institute, Nanjing, Jiangsu 210023, P.R.China
2
Department of Environment Science and Engineering, North China Electric Power University, No.689, Yonghua North Road, Baoding, Hebei Province, 071000, P.R.China
* Corresponding author: lucifertan@163.com
Recent years, as the development of thermal power plant, superheater oxide film caused by over temperature and tube explosion and the turbine blade erosion problem more and more serious. The research and development of chemical cleaning technology of superheater oxide film is one of the most effective ways to solve this problem. The chemical cleaning of superheater is rather difficult than that of boiler, for mainly the reason as below. First, the scale of superheater tube, differences in microstructure, scales dense and need to use higher cleaning medium concentration and longer cleaning time. Second, the materials of superheater complex, involves ferritic steel and austenitic stainless steel such as 12Cr1MoV, T22, T91, TP347 and SUS304. For controlling chemical cleaning process, the acid corrosion sample is employed to slow inhibitor on different metal and alloys. Also, the traditional weight-loss method to evaluate the corrosion rate of materials in chemical cleaning process is discussed to monitor the corrosion process.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.